HP CommonIO Products Instrukcja Użytkownika Pobierz pdf (Strona 105)

OLA/R Overview and Concepts

How to On-line Replace (OLR) a J3525A PCI Card using SMH

Chapter 4 105

NOTE The cables must be removed from the PCI I/O card before proceeding

with the OLR operation.

Step 8. Once you click the “OK” button on the Analyze Critical Resources

screen, SMH begins to take the selected card out of service. SMH

requests a suspend operation for the driver of the selected card.

Step 9. Once the drivers are suspended, SMH turns off the power to the slot in

which the card is located.

Step 10. SMH then illuminates the amber attention LED on the slot itself to

make the suspended card more easily locatable on the system chassis.

Step 11. SMH now requests that the card be replaced via a dialog box. Read the

contents of this dialog for any extra information (Expansion cabinets,

warnings, etc.). Also at this point, SMH turns off the slot’s green power

LED.

Step 12. Replace the target card. Please refer to your system manual for removal

and insertion of the PCI I/O cards.

NOTE Do not connect the cables to the card at this point.

Step 13. At this point, the amber LED should still be be activated, and the green

power LED should still be off.

Return to the console, and click the “OK” button on the Replace Card

dialog.

WARNING Pressing the “Cancel” button here will prevent you from easily

restoring power to this slot (or Power Domain). If this happens,

you must shut-down, then re-boot, the system to restore power.

Step 14. Once you click “OK”, SMH first resets the attention LED to it’s normal

state.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 260 261

Brak uwag

HP CommonIO Products Instrukcja Użytkownika Strona 105