HP VMA-series Memory Arrays Instrukcja Użytkownika Strona 243
- Strona / 278
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 243
Trap Information Table
Trap Name Threshold Value Unit Description Recommendation Severity
array-data-plane-ready State Change 0 or 1 A VMA Array data plane
available state change has
occurred. The old value and
new values are supplied. A
value of 0 = not ready, 1 =
ready.
If the new value is 0, then
check the VMA Array
alarms for more
information.
High / Low
array-led-change State Change State One or more of the LEDs on
a VMA Array has changed
state. The following LEDs
are tracked for state change:
Alarm, PowerA, PowerB,
and Status. The LED values
are: OFF, SLOW_BLINK,
FAST_BLINK, or ON.
If the new value is OFF for
either Power LED, then
check power cables. If
Status LED is anything but
ON, or Alarm LED is
anything but OFF, then
check the VMA Array for
alarms.
High / Low
array-pcie-link-down Event Triggered The VMA Array specified
in the trap has detected a
PCIe link loss.
Check the PCIe cable
between the VMA Array
and the HP VMA SAN
Gateway.
High
array-pcie-link-up Event Triggered The VMA Array specified
in the trap has detected that
the PCie link has gone
active.
Nothing. Low
array-psu-state State Change State A VMA Array has changed
state regarding one or both
of the Power Supply Units.
A true or false value for
psuA and psuB specifies
whether the old / new values
are different. The PSU state
can be: Absent, ON, or OFF.
Check the power source to
the VMA Array power
supplies.
High / Low
array-raid-rebuild State Change 0 or 1 A VMA Array has changed
state regarding VIMM
RAID group rebuild. A new
value of 1 specifies that a
RAID rebuild is in progress
and that performance will be
affected. A new value of 0
specifies that the RAID
rebuild has completed.
If the new value is 1, check
the VMA Array alarms for a
failed VIMM and contact
HP support for a possible
replacement.
Medium
chassis-temperature-high 75 Celsius Temperature inside a VMA
Array chassis has exceeded
normal operating range
Check airflow and operating
environment.
High
chassis-temperature-ok 70 Celsius Temperature inside a VMA
Array chassis has dropped
into normal operating range
Nothing. Low
- HP VMA SAN Gateway 1
- Installation and User Guide 1
- LEGAL NOTICES 2
- Mountain View, CA 94043USA 3
- Table of Contents 5
- List of Figures 9
- Document Conventions 11
- Security & Compliance 12
- Compliance Information 12
- Notice Description 13
- Contacting HP 14
- Before you contact HP 14
- HP contact information 14
- Subscription Service 14
- Reference Documents 15
- Documentation feedback 15
- HP VMA SAN Gateway Overview 17
- Deployment Overview 23
- Phase 5: vSHARE Configuration 26
- Front View 28
- Rear View 29
- Connecting Power 31
- Connecting Network Interfaces 32
- Table 2.2 Modem Settings 34
- Cluster Network Configuration 37
- Configuring Network Settings 38
- Cluster Management VIP 54
- Monitoring the Cluster 54
- Saving Configurations 57
- Show Configuration Files 60
- Show Configuration 61
- User Management 63
- Software Upgrades 64
- Configuring vSHARE 65
- Scale-out Clustering 66
- Provisioning API 66
- Storage Management 66
- [block] [force][name] 70
- 2. Enter Config mode 71
- Configuring Target Ports 73
- Configuring Initiator Groups 74
- Creating LUNs 76
- Table 4.3 lun create Command 78
- Table 4.4 show luns Command 79
- Exporting LUNs 80
- Table 4.5 lun export Command 81
- Port BPort A 83
- Shared Partition 83
- Configuring Interface Bonding 85
- HP VMA memory array 86
- Gateway 2 86
- Gateway 1 86
- Operating vSHARE 89
- Table 5.1 Show Media Options 92
- Managing Containers 102
- Managing Initiator Groups 102
- Managing LUNs 102
- Managing Targets 104
- Monitoring LUN Status 104
- Figure 5.1 LUN Status Page 105
- Managing Initiators 109
- Fibre Channel Target Ports 111
- Command Line Interface 113
- Getting Help 114
- Tab Completion of Commands 116
- Command Modes 117
- CLI Command Descriptions 120
- Key to Command Parameters 120
- NTP, Clock, and Time Zones 129
- Event Notification 131
- For example: 133
- Diagnostic Tools 135
- Statistics 137
- Configuration File Management 140
- Image Management 143
- Enable and Config Modes 144
- Web Proxy Settings 145
- Xinetd Server Settings 145
- Debug Dumps 146
- Network Interface Commands 148
- Network Bond Commands 150
- VLAN Commands 151
- Name Resolution Commands 152
- Routing Commands 152
- Additional CLI Commands 152
- ARP Configuration 152
- RADIUS Configuration 154
- TACACS+ Configuration 155
- SSH Configuration 157
- CLI Options 159
- SNMP Configuration 162
- Media Management Commands 167
- Media Initialization 167
- Media Enable 167
- Show Media 168
- Containers 170
- Initiator Groups 171
- Quick Reference to Commands 173
- S: Standard Mode 174
- E: Enable Mode 174
- C: Config Mode 174
- VMA Web Interface Reference 177
- Category Pages 179
- Table B.2 Supported Browsers 181
- Printing Pages 182
- Login and Logout 183
- Logout Page 184
- Cluster Management 184
- Cluster Status Page 184
- Figure B.4 Status Page 185
- Figure B.5 Board Status Page 186
- Gateways Page 188
- Figure B.9 Alerts Page 190
- Logs Page 191
- Versions Page 191
- Administration Pages 192
- Cluster Administration Page 193
- Network Page 194
- DNS Settings Page 195
- NTP Settings Page 196
- Web Administration Page 196
- Feature Licenses Page 198
- Users Page 199
- Alert Recipients Page 200
- Call Home 202
- Tools Pages 202
- Tools: Upgrade 203
- Tools: Diagnostics 204
- Help Pages 204
- Help: Documentation 204
- Help: About 204
- Help: License 205
- Help: Acknowledgements 205
- LUN Status 205
- LUN Management 206
- Initiator Management 209
- Target Management 210
- VMA Utilities 213
- VMA Utilities Reference 214
- <partition_name> 226
- # vspeedtest 227
- Version G5.1.x 239
- Trap Information Table 243
- Configuring and Testing Traps 248
- Spare VIMMs 249
- Failed VIMMs 249
- PSU States 249
- Performance Stats 253
- New Trap MIB Objects 255
- vmemModel 258
- Regulatory Information 268
- Regulatory Model Number 268
- Installation Conditions 268
- Network Connected Equipment 268
- Lithium Battery Caution 269
- Cabinet Safety Precautions 269
- European Union RFI Statement 270
- Korea RFI Statement 271
- Canada RFI Statement 271
- Australia C-Tick Label 271
- Taiwan BSMI Statement 271
Komentarze do niniejszej Instrukcji
Powiązane produkty i podręczniki dla Networking HP VMA-series Memory Arrays
Networking HP CN1000E Instrukcja Użytkownika
(48 strony)
(48 strony)
Networking HP Jetdirect 175x Instrukcja Użytkownika
(202 strony)
(202 strony)
Networking HP 100VG Podręcznik Użytkownika
(46 strony)
(46 strony)
(44 strony)
Networking HP MT40 Instrukcja Naprawy
(31 strony)
(31 strony)
Networking HP MSM7XX Instrukcja Użytkownika
(206 strony)
(206 strony)
Networking HP JetDirect 300X Instrukcja Użytkownika
(164 strony)
(164 strony)
Networking HP 11i Instrukcja Użytkownika
(54 strony)
(54 strony)
Networking HP 72H3482 Instrukcja Użytkownika
(41 strony)
(41 strony)
Networking HP J3188A Instrukcja Użytkownika
(100 strony)
(100 strony)
Networking HP NC373F Instrukcja Użytkownika
(17 strony)
(17 strony)
Networking HP 620n Podręcznik Użytkownika
(264 strony)
(264 strony)
Networking HP F100 Instrukcja Użytkownika
(46 strony)
(46 strony)
Networking HP 640n Podręcznik Użytkownika
(228 strony)
(228 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
5 Lessons You Can Learn From Pornstar UK pornstar uk
7 Simple Secrets To Totally Moving Your Xxx Of Pornstar xxx of pornstar