HP VMA-series Memory Arrays Instrukcja Użytkownika Pobierz pdf (Strona 10)

1. Configure the serial connection between the Laptop and the VMA32xx Array.

a. Confirm which COM port on the Laptop the serial null modem cable is connected to. If

your Laptop has a single serial COM port, it will likely be COM1.

b. If you are using a usb-to-serial converter cable with a serial null modem cable, the

Windows Device Manager helps to identify which COM port the USB convertor is

connected to after the USB cable is connected to the Laptop and the proper driver is

installed. See the following example:

c. In this example, a USB serial convertor is being used and as pointed to above, it is

identified as COM4.

d. After you have identified the correct COM port to use, launch the serial terminal emulation

program. If you are using the PuTTY program, the following window appears:

e. Select the Serial radio button.

10 Updating the HP VMA3205 and VMA3210 Array Firmware

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Brak uwag

HP VMA-series Memory Arrays Instrukcja Użytkownika Strona 10