HP mp8200 Instrukcja Użytkownika

Hardware Reference GuideHP SignagePlayer mp8200, mp8200s

Media Card Reader ComponentsThe media card reader is an optional device available on some models only. Refer to the followingillustration and table to

KeyboardFigure 1-5 Keyboard ComponentsTable 1-4 Keyboard Components1 Function Keys Perform special functions depending on the software application b

Using the Windows Logo KeyUse the Windows Logo key in combination with other keys to perform certain functions available in theWindows operating syste

Table 1-5 Windows Logo Key Functions (continued)Windows Logo Key + up arrow Maximizes the windowWindows Logo Key + left arrow Snaps the window to the

2 Hardware UpgradesServiceability FeaturesThe computer includes features that make it easy to upgrade and service. No tools are needed for mostof the

Connecting the Power CordWhen connecting the power supply, it is important to follow the steps below to ensure the power corddoes not pull free from t

Removing the Computer Access PanelTo access internal components, you must remove the access panel:1. Remove/disengage any security devices that prohib

Replacing the Computer Access Panel1. Align the tabs on the panel with the slots on the chassis then slide the panel towards the front ofthe chassis u

Removing the Front Bezel1. Remove/disengage any security devices that prohibit opening the computer.2. Remove all removable media, such as compact dis

Removing a Bezel BlankOn some models, there is a bezel blank covering the internal drive bay that needs to be removedbefore installing a drive. To rem

© Copyright 2010–2011 Hewlett-PackardDevelopment Company, L.P. The informationcontained herein is subject to changewithout notice.Microsoft, Windows,

Replacing the Front BezelInsert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1) thenrotate the top side

Changing from Desktop to Tower Configuration1. Remove/disengage any security devices that prohibit opening the computer.2. Remove all removable media,

System Board ConnectionsRefer to the following illustration and table to identify the system board connectors.Figure 2-8 System Board ConnectionsNo.

Installing Additional MemoryThe computer comes with double data rate 3 synchronous dynamic random access memory (DDR3-SDRAM) small outline dual inline

Populating SODIMM SocketsThere are two SODIMM sockets on the system board, with one socket per channel. The sockets arelabeled XMM1 and XMM3. The XMM1

Installing SODIMMsCAUTION: You must disconnect the power cord and wait approximately 30 seconds for the powerto drain before adding or removing memory

8. To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1) thenpull the SODIMM out of the socket (2).Figure 2-10 Removing

12. Reconnect the power cord and turn on the computer.13. Lock any security devices that were disengaged when the computer cover or access panel wasre

7. Disconnect the cables on the rear of the optical drive (1), push the green release latch on the rightrear side of the drive toward the center of th

Preparing the New Optical DriveBefore the new optical drive can be used, the release latch must be attached.1. Peel the backing off the adhesive on th

About This BookWARNING! Text set off in this manner indicates that failure to follow directions could result in bodilyharm or loss of life.CAUTION: Te

Installing the New Optical DriveNOTE: If you are installing an optical drive in a bay that did not previously have a drive in it, youmust remove the a

Replacing the Hard DriveNOTE: The computer supports only 2.5-inch Serial ATA (SATA) internal hard drives.Before you remove the old hard drive, be sure

9. Lift the hard drive carrier straight up and out of the chassis.Figure 2-16 Removing the Hard Drive Carrier10. Remove the four guide screws from th

12. Position the hard drive so that the top of the hard drive is up against the top of the carrier (1) sothat the circuit board on the bottom of the h

14. To place the hard drive carrier back in the chassis, align the guide screws with the slots on thedrive bay, drop the carrier straight down into th

Installing and Removing a Port CoverAn optional rear port cover is available for the computer.To install the port cover:1. Thread the cables through t

Installing a Security LockHP/Kensington MicroSaver Security Cable LockThere are two cable lock slots on the rear of the computer. The slot next to the

PadlockFigure 2-26 Installing a PadlockHP Business PC Security Lock1. Fasten the security cable by looping it around a stationary object.Figure 2-27

2. Insert the Kensington lock into the Kensington lock slot on the back of the monitor and secure thelock to the monitor by inserting the key into the

4. Use the bracket provided in the kit to secure other peripheral devices by laying the device cableacross the center of the bracket (1) and inserting

iv About This Book

6. Screw the lock to the chassis in the thumbscrew hole using the screw provided.Figure 2-32 Attaching the Lock to the Chassis7. Insert the plug end

8. When complete, all devices in your workstation will be secured.Figure 2-34 Secured WorkstationFront Bezel SecurityThe front bezel can be locked in

7. Remove the black screw on the front of the chassis behind the bezel. The screw is located next tothe optical drive and is labeled "BEZEL."

A Battery ReplacementThe battery that comes with the computer provides power to the real-time clock. When replacing thebattery, use a battery equivale

6. Locate the battery and battery holder on the system board.NOTE: On some computer models, it may be necessary to remove an internal component togain

Type 3a. Pull back on the clip (1) that is holding the battery in place, and remove the battery (2).b. Insert the new battery and position the clip ba

B Electrostatic DischargeA discharge of static electricity from a finger or other conductor may damage system boards or otherstatic-sensitive devices.

C Computer Operating Guidelines,Routine Care andShipping PreparationComputer Operating Guidelines and Routine CareFollow these guidelines to properly

Optical Drive PrecautionsBe sure to observe the following guidelines while operating or cleaning the optical drive.Operation●Do not move the drive dur

IndexAaccess panelUSDT removal 10USDT replacement 11Bbattery replacement 37Ccomputer operating guidelines 41Eelectrostatic discharge, preventingdamage

Table of contents1 Product Features ... 1

Installing a Security Lock ... 30HP/Kensington

1 Product FeaturesStandard Configuration FeaturesFeatures may vary depending on the model. For a complete listing of the hardware and softwareinstalle

Front Panel ComponentsDrive configuration may vary by model. Some models have a bezel blank covering the optical drivebay.Figure 1-2 Front Panel Comp

Rear Panel ComponentsFigure 1-3 Rear Panel ComponentsTable 1-2 Rear Panel Components1 Line-Out Connector for powered audio devices(green)6 Power C