HP C6100 Instrukcja Użytkownika Strona 1

HP Photosmart C6100 All-in-One seriesBasics Guide

Label Name and Description20 Scan Menu: Opens the Scan Menu where you can select a destination for yourscan.21 Copy Menu: Selects copy options, such a

Solution Turn on the networked devices, such as the access point for an infrastructurenetwork, or the computer for an ad hoc network. For more informa

Note Some access points provide more than one WEP key. Make sure you use thefirst WEP key (index 1) when setting up your wireless network.Error messag

Note The HP All-in-One functionality will be limited during VPN sessions.Cause The Ethernet cable is not plugged in to the router, switch, or hub, or

3. Gently pull the paper out of the rollers.Caution If the paper tears when you are removing it from the rollers, check the rollersand wheels for torn

4. Gently pull out any paper that is jammed in the automatic document feeder mechanism.Caution If the paper tears when you are removing it, check for

One. To find out the reorder number for all the ink cartridges that the HP All-in-One supports,follow the instructions provided in this guide.For more

remove and replace the expired ink cartridge, and then close the message. You can alsocontinue printing without replacing the ink cartridge, by follow

Solution Remove any objects that are blocking the print head assembly.To clear the print head assembly1. Open the ink cartridge door by lifting from t

Solution You might be able to continue printing for a short period of time with ink remainingin the print head assembly. Replace the indicated ink car

Support processIf you have a problem, follow these steps:1. Check the documentation that came with the HP All-in-One.2. Visit the HP online support We

Find more informationA variety of resources, both printed and onscreen, provide information about setting upand using the HP All-in-One.● Setup GuideT

6Technical informationThe technical specifications and international regulatory information for the HP All-in-One areprovided in this section.System r

Copy specifications● Copy resolution up to 4800 x 4800● Digital image processing● Up to 99 copies from original (varies by model)● Zoom to 400%, fit t

Environmental specifications● Recommended operating temperature range: 15º to 30º C (59º to 86º F)● Allowable operating temperature range: 5º to 40º C

WarrantyChapter 6110 HP Photosmart C6100 All-in-One seriesTechnical information

IndexSymbols/Numerics10 x 15 cm photo paperload 59specifications 1074 x 6 inch photo paper, load59802.11 wireless, configurationpage 29802.3 wired, co

test failed 77test setup 56troubleshoot 76voice mail, set up 44, 52fax problemsfax tones recorded 91receiving 82, 88sending 82, 86, 87firmware version

Rradio, turn off 23receive faxauto answer mode 54rings to answer 55regulatory noticesregulatory modelidentification number109reinstall software 73repl

URL 26USB cable installation 75Vvisibility (Bluetooth) 33voice mailset up with fax 44, 52Wwall jack test, fax 77warranty 106WEP key, setup 18wirelessr

2Network setupThis section describes how to connect the HP All-in-One to a network and how to viewand manage network settings.If you want to:See this

What you need for a wired networkBefore you connect the HP All-in-One to a network, make sure you have all of the requiredmaterials.❑A functional Ethe

To connect the HP All-in-One to the network1. Remove the yellow plug from the back of the HP All-in-One.2. Connect the Ethernet cable to the Ethernet

Note 2 Installation time can range from 20 to 45 minutes depending on youroperating system, the amount of available space, and the processor speed ofy

5. From the HP Installer dialog, select your language and the HP All-in-One you wantto connect.6. Follow the onscreen instructions to complete all the

❑Broadband Internet access (recommended) such as cable or DSL.If you connect the HP All-in-One on a wireless network that has Internet access, HPrecom

For information on how to open the access point EWS, see the access pointdocumentation.Note If the network is set up with an Apple AirPort base statio

c. Press OK to confirm.The HP All-in-One will attempt to connect to the network. If a message saysyou entered an invalid WPA or WEP key, check the key

HP Photosmart C6100 All-in-One seriesBasics Guide

To prepare your computer1. Quit all applications running on your computer, and temporarily disable all firewallsincluding the internal XP firewall and

b. If there is a Network Authentication list, select Open. Otherwise, go to thenext step.c. In the Data encryption list, select WEP.Note It is possibl

1. Make sure that your AirPort is turned on.When AirPort is turned on, the following icon appears in the menu bar (ShowAirPort must be selected in the

Using the LAN card configuration program, create a network profile that has the followingvalues:● Network name (SSID): Mynetwork (example only)● Commu

6. If prompted, enter your WEP key as follows. Otherwise go to step 7.a. Use the arrow buttons to highlight a letter or number on the visual keyboard,

To change a USB connection to a wired (Ethernet) connection1. Unplug the USB connection from the back of the HP All-in-One.2. Connect an Ethernet cabl

To view and print the network settings1. On the control panel of the HP All-in-One, press Setup.2. Press until Network is highlighted, and then press

To print the wireless test report1. On the control panel of the HP All-in-One, press Setup.2. Press until Network is highlighted, and then press OK.3

3. Press until Advanced Setup is highlighted, and then press OK.Press until IP Settings is highlighted, and then press OK.4. Press until Manual is

4. Click the Home tab to access device and network information, or click theNetworking tab to access more network information or to modify networkinfo

© 2006 Hewlett-Packard DevelopmentCompany, L.P.Adobe® and the Acrobat logo® aretrademarks of Adobe SystemsIncorporated.Windows®, Windows NT®, WindowsM

Parameter DescriptionNote You will need to know this URL when you try to access theEmbedded Web Server.FirmwareRevisionThe internal networking compone

Parameter DescriptionSubnet Mask A subnet is an IP address assigned by the installation software tomake an additional network available as part of a l

Parameter DescriptionTotal PacketstransmittedThe number of packets transmitted by the HP All-in-One withouterror since it has been turned on. The coun

Parameter DescriptionConfigurationSourceThe protocol used to assign the IP address to the HP All-in-One:● AutoIP: The installation software automatica

Parameter DescriptionNetwork Name(SSID)Service Set Identifier. A unique identifier (up to 32 characters) thatdifferentiates one wireless local area ne

Parameter DescriptionA network using Shared Key authentication provides increasedsecurity by requiring users or devices to identify themselves with as

Bluetooth settingsThe following table describes the Bluetooth settings shown on the network configurationpage.ParameterDescriptionDeviceAddressThe har

3Fax setupAfter completing all the steps in the Setup Guide, use the instructions in this section tocomplete your fax setup. Please keep your Setup Gu

Korea Latin America MalaysiaMexico Philippines PolandPortugal Russia Saudi ArabiaSingapore Spain TaiwanThailand USA VenezuelaVietnam If you are uns

and another phone number with double rings to your fax calls. This allows you to tellthe difference between voice and fax calls when the phone rings.4

Contents1 HP All-in-One overview...3The HP All-in-One at a glanc

Other equipment/services sharing your faxlineRecommended fax setupfor parallel-type phonesystemsRecommended fax setupfor serial-type phonesystemsNone(

Other equipment/services sharing your faxlineRecommended fax setupfor parallel-type phonesystemsRecommended fax setupfor serial-type phonesystemsVoice

Case A: Separate fax line (no voice calls received)If you have a separate phone line on which you receive no voice calls, and you have noother equipme

Back view of the HP All-in-One1 Telephone wall jack2 DSL filter and cord supplied by your DSL provider3 Use the phone cord supplied in the box with th

Case C: Set up the HP All-in-One with a PBX phone system or an ISDN lineIf you are using either a PBX phone system or an ISDN converter/terminal adapt

Case D: Fax with a distinctive ring service on the same lineIf you subscribe to a distinctive ring service (through your telephone company) that allow

Case E: Shared voice/fax lineIf you receive both voice calls and fax calls at the same phone number, and you have noother office equipment (or voice m

3. Run a fax test.4. Do one of the following, depending on your phone system:– If you have a parallel-type phone system, remove the white plug from th

To set up the HP All-in-One with voice mail1. Using the phone cord supplied in the box with the HP All-in-One, connect one endto your telephone wall j

3. Using the phone cord supplied in the box with the HP All-in-One, connect one endto your telephone wall jack, then connect the other end to the port

Copy specifications...108Scan specifications...

splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug onthe back.)Example of a parallel splitter● If your computer has tw

4. Using the phone cord supplied in the box with the HP All-in-One, connect one endto your telephone wall jack, then connect the other end to the port

Case I: Shared voice/fax line with answering machineIf you receive both voice calls and fax calls at the same phone number, and you alsohave an answer

3. Using the phone cord supplied in the box with the HP All-in-One, connect one endto your telephone wall jack, then connect the other end to the port

splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug onthe back.)Example of a parallel splitter● If your computer has tw

3. Unplug your answering machine from the telephone wall jack, and connect it to the“OUT” port on the back of your computer modem.This allows a direct

Note You cannot receive faxes automatically if you have a voice mail service atthe same phone number you use for fax calls. You must receive faxes man

4 Telephone5 Computer with modem6 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE"portTo set up the

To set the answer mode➔Press Auto Answer to turn the light on or off, as appropriate for your setup.When the Auto Answer light is on, the HP All-in-On

Test your fax setupYou can test your fax setup to check the status of the HP All-in-One and to make sure itis set up properly for faxing. Perform this

1HP All-in-One overviewUse the HP All-in-One to quickly and easily accomplish tasks such as making a copy,scanning documents, or printing photos from

4. Use the visual keyboard to enter your personal or company name. When you arefinished, highlight Done on the visual keyboard, and then press OK.5. E

4Use the HP All-in-One featuresUse the HP All-in-One to quickly and easily accomplish tasks such as making a copy,scanning documents, printing photos,

2. Slide the paper guides inward until they stop at the left and right edges of the paper.Note Remove all originals from the document feeder tray befo

To load 10 x 15 cm (4 x 6 inch) photo paper in the photo tray1. Raise the output tray until it goes no further.2. Pull out the photo tray.3. Insert th

● If you are printing labels, ensure that the label sheets are no more than two yearsold. Labels on older sheets might peel off when the paper is pull

To scan to a computer1. Load your original print side down in the right front corner of the glass.2. Press Scan Menu.3. Press to highlight Scan to Co

c. When the Fix Faded Original? prompt appears, highlight Yes or No asappropriate, and then press OK.The HP All-in-One scans your original and shows a

Print 10 x 15 cm (4 x 6 inch) photosYou can select specific photos on your memory card or storage device to print as 10 x15 cm (4 x 6 inch) photos.To

6. Press or to highlight a paper size, and then press OK.The following options are available:– Print one 10 x 15 cm (4 x 6 inch) borderless photo

To print from a software application (Windows)1. Make sure you have paper loaded in the input tray.2. On the File menu in your software application, c

The HP All-in-One at a glanceLabel Description1 Automatic document feeder2 Color graphics display (also referred to asthe display)3 Output tray4 Paper

Send a basic faxYou can easily send a single- or multiple-page black-and-white fax by using the controlpanel, as described here.Note If you need print

region, follow the prompts to select your product, and then click one of the shopping linkson the page.To replace the ink cartridges1. Make sure the H

4. Pull the ink cartridge toward you out of its slot to remove it.Tip You can recycle low or empty ink cartridges. The HP Inkjet SuppliesRecycling Pro

7. Repeat steps 2 through 5 for each ink cartridge you are replacing.8. Close the ink cartridge door.Align the printerThe printer automatically aligns

Clean the glassGlass that is dirty from fingerprints, smudges, hair, and dust on the main glass surfaceslows down performance and affects the accuracy

4. Clean the glass strip with a soft cloth or sponge slightly moistened with a nonabrasiveglass cleaner.Caution Do not use abrasives, acetone, benzene

5Troubleshooting and supportThis chapter contains troubleshooting information for the HP All-in-One. Specific information isprovided for installation

To verify that the software is properly installed, double-click the HP Solution Center icon on thedesktop. If the HP Solution Center shows the essenti

Cause You pressed the On button too quickly.Solution The HP All-in-One might not respond if you press the On button too quickly. Pressthe On button on

7. Press to scroll through the countries/regions. When the country/region you want to useappears, press OK.8. When prompted, press to highlight Yes

Label Description14 Glass15 Lid backingLabel Description1 Ethernet port2 Rear USB port3 Power connection*4 1-LINE (fax) and 2-EXT (phone) ports5 Rear

The fax test failedIf you ran a fax test and the test failed, review the report for basic information about the error. Formore detailed information, c

telephone wall jack, then connect the other end to the port labeled 1-LINE on the back ofthe HP All-in-One.1 Telephone wall jack2 Use the phone cord s

Back view of the HP All-in-One1 Telephone wall jack2 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE"

labeled 1-LINE on the back of the HP All-in-One and the other end to your telephone walljack, as shown below.1 Telephone wall jack2 Phone cord supplie

telephone wall jack, then connect the other end to the port labeled 1-LINE on the back ofthe HP All-in-One.1 Telephone wall jack2 Use the phone cord s

● Other equipment, which uses the same phone line as the HP All-in-One, might be causingthe test to fail. To find out if other equipment is causing a

port labeled 1-LINE on the back of the HP All-in-One and the other end to your telephone walljack, as shown below.1 Telephone wall jack2 Use the phone

Use the port labeled 1-LINE on the back of the HP All-in-One to connect to the telephone walljack. Use the 2-EXT port to connect to any other equipmen

line that can interfere with the HP All-in-One, preventing the HP All-in-One from sending andreceiving faxes. The DSL filter removes the digital signa

sound quality of the phone line by plugging a phone into the telephone wall jack and listeningfor static or other noise.If you hear noise, do the foll

Label Name and Description1 Color graphics display (also referred to as the display): Displays menus, photos, andmessages. The display can be pulled u

The HP All-in-One is having problems sending a manual faxCause The recipient's fax machine might not support receiving faxes manually.Solution Ch

The HP All-in-One cannot receive faxes, but can send faxesCause The HP All-in-One is not set up properly for faxing.Solution Follow the instructions i

SolutionNote This possible solution applies only in the countries/regions that receive a 2-wirephone cord in the box with the HP All-in-One, including

Note The HP All-in-One cannot recognize some ring patterns, such as those withalternating short and long ringing patterns. If you are having problems

Note To clear the memory, you can also delete the faxes stored in memory by turningoff the HP All-in-One.Cause An error condition is preventing the HP

When you have an answering machine on the same phone line you use for fax calls, you mustconnect the answering machine directly to the HP All-in-One u

Network troubleshootingThis section addresses problems you might encounter while setting up a network.● Wired network setup troubleshooting● Wireless

To establish an active network connection1. Check the cable connections from the HP All-in-One to your gateway, router, or hub toensure connections ar

Solution Try reinserting the cables. Or, if necessary, try a different cable.Cause The HP All-in-One is assigned an AutoIP address instead of DHCP.Sol

Solution Access the Embedded Web Server and turn on the Broadcast SSID option. Youcan also use the Enter a New Network Name (SSID) option in the Wirel