HP Access Control Przewodnik Szybki Start Pobierz pdf (Strona 44)

Figure 5-11 Filter devices

5.7 Install and configure components on HP FutureSmart and

non-FutureSmart devices

Prerequisites:

●

Before installing any solution on HP devices, make sure the correct PRN installation file displays in the

Installation file field in the Settings tile > Agent tab.

●

Make sure a device administrator password is set on MFPs and matches the device administrator name

and password in the Settings tile > Device tab.

●

On some Non-FutureSmart MFPs, make sure to right-click the device row and select Enable OXPd 1.6

and reboot device before configuring the device for pull printing. OXPd 1.6 allows the pull printing

button to display on the front panel.

●

Make sure the printing protocol selected in the HP AC configuration tool (in the Settings tile > SPP

Express or SPP Enterprise tab) is enabled on the HP device (in the device EWS > Networking tab > Other

Settings page).

Follow the steps below:

1. Select the device(s) from the device list.

36 Chapter 5 Devices tile

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 70 71

Brak uwag

HP Access Control Przewodnik Szybki Start Strona 44