HP Access Control Przewodnik Szybki Start Strona 57

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 71
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 56
5. To register the HPAuthWS authentication application with the MFP, select Application Settings
followed by External Applications Settings followed by External Accounting Application Settings.
a. Select Enable in the External Account Control dropdown.
b. Select the Set Authentication Server (Server 1) checkbox.
c. Select Enable in the Server 1 dropdown.
d. Specify an Application Name.
e. Specify the Address for Application UI as http://serverIP/HPAuthWS/Default.aspx, where serverIP
is the IP address of the server.
f. Specify the Address for Web Service as http://serverIP/HPAuthWS/MFPSink.asmx, where serverIP
is the IP address of the server.
Figure 5-30 External accounting application settings
g. Click Submit. Then select Reboot Now to reboot the device and apply the settings.
5.9.1 Pull printing at the device
Prerequisites:
On the server, open the HP AC configuration tool, go to the IRM tile > AD Configurator tab and make
sure the IRM settings are correct for authentication.
NOTE: If you change the IRM authentication method to Code Only, you must recycle the HPACWS
application pool before authenticating at the device. If an error message displays on the front panel, power
cycle the device.
To use card authentication, make sure a card reader is connected to the device and cards are registered
to users. To enroll cards to users, use the Card Enrollment application from a desktop or use the Card
Enrollment feature at an HP LaserJet MFP or HP OfficeJet Pro.
If you chose to use the TCPIP/IPPS protocol in the HP AC configuration tool > Settings tile > SPP Express
or SPP Enterprise tab, make sure IPPS-SLL is enabled on the device. Go to the device web page >
Security Settings > SLL Settings. In the Setting of SLL section, make sure IPP-SLL is set to Enable. Click
Submit.
Section 5.9 Configure components on HP S900 series devices 49
Przeglądanie stron 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 70 71

Komentarze do niniejszej Instrukcji

Brak uwag