HP SuperStack Firewall Series Instrukcja Użytkownika Strona 45

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 44
Configuring LAN Settings 45
If there is no DHCP server found on the network connected to the
LAN port then the Firewalls DHCP server is activated allowing
automatic address configuration on your LAN.
If there is a DHCP server found on the network connected to the LAN
port then the Firewall deactivates its DHCP server. This prevents the
Firewall giving out addresses that will conflict with those allocated by
another server.
Entering information
about your LAN
If you are using NAT the Fill in information about your LAN screen will
appear as shown in Figure 16 below. If you are not using NAT this screen
will not appear as these settings will be the same as the WAN settings.
Figure 16
Configuring LAN Settings
Choose an IP address for the LAN port of your Firewall and enter it in
the Firewall LAN IP Address field.
Enter the Subnet mask for your LAN network in the LAN Subnet Mask
field.
The default IP address of the Firewall is
192.168.1.254
with a subnet
mask of
255.255.255.0
. You may want to keep this setting as other
3Com products also have their default addresses in this range.
Click the Next button to continue.
Configuring the DHCP
Server
If a DHCP server has been detected on your LAN network then the
Firewall will disable its DHCP server and this screen will not display.
DUA1611-0AAA02.book Page 45 Thursday, August 2, 2001 4:01 PM
Przeglądanie stron 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 213 214

Komentarze do niniejszej Instrukcji

Brak uwag