HP 200 Unified Threat Management (UTM) Appliance Series Przewodnik Szybki Start Pobierz pdf (Strona 77)

Configuring ACSEI client on the firewall module

Ste

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view

interface interface-type

interface-number

N/A

3. Enable the ACSEI client

acsei-client enable

Disabled by default.

The Comware platform can run only one

ACSEI client, that is, the ACSEI client can

be enabled on only one interface at a

time. But the ACSEI client on the

Comware platform and that on the

firewall module can run simultaneously.

Displaying and maintaining ACSEI server and client

Task Command

Remarks

On the network device:

Display ACSEI client summary.

display acsei client summary

[ client-id ]

Available in any view.

Display ACSEI client information.

display acsei client info

[ client-id ]

Available in any view.

On the firewall module:

Display ACSEI client information. display acsei-client information

Available in any view.

Display current ACSEI client state. display acsei-client status Available in any view.

Example of monitoring and managing the firewall

module from the network device

Network requirements

A firewall module is installed in slot 3 of the network device to detect the traffic passing the network

device. The internal interface Ten-GigabitEthernet 3/0/1 on the network device is connected to the

internal interface Ten-GigabitEthernet0/0 on the firewall module.

The network device redirects received traffic to the firewall module. The firewall module processes the

traffic based on the configured security policy, and redirects permitted traffic to the network device for

forwarding.

Configure the network device and firewall module so that you can log in to and restart the firewall

module from the network device. Configure the clock synchronization timer as 10 minutes, and configure

the monitoring timer as 10 seconds.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 149 150

Komentarze do niniejszej Instrukcji

Brak uwag

HP 200 Unified Threat Management (UTM) Appliance Series Przewodnik Szybki Start Strona 77

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie HP 200 Unified Threat Management (UTM) Appliance Series