HP DL380-SL Podręcznik Użytkownika Pobierz pdf (Strona 77)

Chapter 3: mx Commands 66

--vendor <vendor>

The vendor for your remote management controller (dell, hp, ibm, or ipmi).

mxconfig mp – membership partition commands

Use the following commands to manage membership partitions on an online or

offline cluster.

NOTE: If you are performing the initial configuration of a cluster, the mx

config, mx config mp, and mp config snapshot commands must be

entered in a specific order. See Appendix A in the HP StorageWorks

Clustered File System Installation Guide for more information.

In general, these commands can be used when HP Clustered File System is

online or offline. However, when HP Clustered File System is running, the set

and repair commands can be used only under the following circumstances:

• A disk containing a membership partition is out-of-service (use the set

command to move the partition to another disk).

• You need to move one or more membership partitions to different storage

(use the set command to move the partitions one-at-a-time).

• In a cluster with three membership partitions, when HP Clustered File

System started on a server, it reported that a single membership partition

was corrupt (use the repair command to resilver the partition or use set to

replace the partition).

• Your cluster contains a single membership partition and you want to add

two more partitions (use the set command).

Command Description

dump Dump the membership partition configuration

list List the current membership partitions in a running or

stopped cluster

list_avail_disks List disks that can be used for membership partitions

list_avail_partitions List partitions that can be used for membership partitions

repair Repair a membership partition

set Add or replace membership partitions

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 140 141

Brak uwag

HP DL380-SL Podręcznik Użytkownika Strona 77