HP Imaging and Printing Security Center Podręcznik Użytkownika Pobierz pdf (Strona 30)

5. To set the SNMP v1/v2 read community name, click the Read Community Name button, and

enter the name on the device or group of devices, then reenter to confirm.

6. To set the SNMP v1/v2 read/write community name, click the Read/Write Community Name

button, and enter the name on the device or group of devices, then reenter to confirm.

7. To set the SNMP v3 credentials, click the SNMP v3 Credentials button, and then enter the

following information for the device or group of devices:

a. Enter the User Name.

b. Enter the Authentication Passphrase and then reenter it to confirm.

c. Select the Authentication Protocol (MD5 or SHA).

d. Enter the Privacy Passphrase and then reenter it to confirm.

NOTE: If the device requires key credentials, HP IPSC automatically converts the

passphrase.

e. Select the Privacy Protocol (DES or AES).

8. Select the Set Admin (EWS) Password check box to set the HP Embedded Web Server

password. Enter the password and then reenter it to confirm.

9. Select the Set File System Password check box to set the file system password on the device.

Enter the password and then reenter it to confirm.

10. Click OK to save your entries or Cancel to discard them.

26 Chapter 3 Use the HP Imaging and Printing Security Center ENWW

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

Brak uwag

HP Imaging and Printing Security Center Podręcznik Użytkownika Strona 30