Hp Insight Management Agents Instrukcja Użytkownika Pobierz pdf (Strona 102)

Temperature Sensors Information

• Temperature condition—Displays the current temperature condition of the system or client

PC. This value can be:

— OK—The temperature is within normal operating range.

— Degraded—The temperature is above normal for airflow obstructions. Make sure that

the cover is on.

CAUTION: Do not operate the system with the cover removed. Proper airflow is

possible only when the cover is in place and properly secured.

— Failed—The temperature is outside the normal operating range and could permanently

damage the system. The system automatically shuts down to prevent damage to

hardware or data loss.

NOTE: A Failed condition does not occur in a client PC since the power supply for

the client is cut off if thermal condition reaches a permanently damaging level.

— Unknown— If the Server Agents or the Server Agent cannot determine the status of

the device, you may need to upgrade your driver software. If you are managing a client

with an unknown temperature status, the client may not support thermal detection.

• Sensor—The number that uniquely specifies the temperature sensor description.

• Location—This specifies the location of the temperature sensor present in the system.

• Temperature—This is the current temperature sensor reading in degrees Celsius.

• Threshold—This is the shutdown threshold temperature sensor setting in degrees Celsius.

This is the temperature at which the sensor is considered to be in a failed state causes the

system to be shutdown.

NOTE: Only the Ambient zone type allows setting of the threshold temperature. Not all

(maybe one or none) sensors can set this value.

• Type—This specifies the type of this instance of temperature sensor. This value can be:

— Blowout—If a blowout temperature sensor reaches its threshold, the fan or fans in the

area of the temperature sensor increases in speed in an attempt to reduce the temperature

before a caution or critical threshold is reached.

• Caution—If a caution temperature sensor reaches its threshold, the temperature condition

is set to degraded and the system either continues or shuts down depending on the setting

of the Thermal Degraded Action.

• Critical—If a critical temperature sensor reaches its threshold, the Temperature Condition

is set to failed and the system shuts down.

• Unknown—The Temperature threshold type could not be determined.

Fault Tolerant Fans Information

This section displays an entry for each of the device or system processor fans.

• Fan—The number that uniquely specifies the fault tolerant fan description.

The status of each fan can be the following:

— OK—The fan is operational.

— Degraded—A redundant fan is not operating properly.

102 Agent information

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 156 157

Brak uwag

Hp Insight Management Agents Instrukcja Użytkownika Strona 102