HP PCIe Workload Accelerators for ProLiant Servers Instrukcja Instalacji Pobierz pdf (Strona 9)

3 Installing the HP PCIe Workload Accelerator Hardware

To install the HP PCIe Workload Accelerator hardware in a system:

1. Power down the host system.

2. Ensure that you are ESD grounded before touching the HP PCIe Workload Accelerator drive

or the host system.

3. Remove the HP PCIe Workload Accelerator drive from the ESD packaging and verify that it

is not damaged. If you suspect that the board is damaged, contact your local HP representative

or the HP PCIe Workload Accelerator Applications Team.

4. Remove the lid or case on the host system to expose the PCIe slots into which the drive will

be inserted.

5. Check the documentation for the system or motherboard to locate an available Gen 2 x8 PCIe

slot (“Introduction” (page 15)) and verify that your slot is 25W capable.

Figure 3 PCIe slots

6. Insert the HP PCIe Workload Accelerator drive into an available Gen 2 compatible x8 link

width PCIe slot.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Brak uwag

HP PCIe Workload Accelerators for ProLiant Servers Instrukcja Instalacji Strona 9