Hp StorageWorks 2.64 Core Switch Instrukcja Użytkownika Pobierz pdf (Strona 21)

Zoning Concepts

21Zoning Version 3.1.x/4.1.x User Guide

Guidelines to Setting Up Zoning

Below are some guidelines for setting up zoning in your fabric:

■ Create a detailed diagram of the fabric, showing all the switches with their

inter-switch links (ISLs). The diagram will help to account for every port in

the fabric.

■ Create an expanded diagram of each switch in the fabric. This diagram will

account for every port type on each switch in the fabric (F_Port, FL_Port,

E_Port etc.).

■ If the fabric is going to contain private loop devices (QuickLoop), then the

user will need to account for this. Refer to Rules of Zoning Architecture on

page 43.

■ Consider turning off unused ports that have nothing connected to them within

zoned fabrics. This is a decision that will affect the security of the fabric. If

Secure Fabric OS is utilized, a policy to lock down ports can be implemented.

■ For a fabrics with multiple zones enabled within it, it is best to configure one

zone at a time and then test it with the Zone Analyzer available in Web Tools.

Do not create all the zones at once; it will be more difficult to debug than

creating and testing one zone at a time. After the first zone is set up in the

fabric, the user may plug in devices and then test the connections to confirm

that everything is functioning properly.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 103 104

Brak uwag

Hp StorageWorks 2.64 Core Switch Instrukcja Użytkownika Strona 21