Hp Integrity NonStop H-Series Instrukcja Użytkownika Pobierz pdf (Strona 59)

Troubleshooting

9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure—524959-003

A-5

Operator Panel Messages

DumpAgain? Drive detected the same CHK

(FSC) within one minute.

Go to “‘Handling a Dump Again?’

Indication” in Appendix A.

“Exp ClCart” Cleaning cartridge is used up. Replace the cleaning cartridge.

FFFF:Dmp Y Alternates with corporate ID at

completion of IPL, where

FFFF=FSC of last dump date

collected, Y=number of

uncollected dumps in EEPROM.

Optionally move dump/s to host

or tape: see various dump

instructions in section 5 or 7.

Fix_CfgErr Upon IPL, configuration

checksum doesn’t match.

Go to “What to do if the Fix

CfgErr Occurs” in Appendix A.

INIT (FSC) Initialization error. Try IPL: if that fails, replace drive.

IPL Pend IPL Pending is displayed for one

second when IPL is pressed.

Wait until IPL completes

automatically.

Load CC The common controller code is

No user action is necessary.

Loading Tape cartridge is being loaded. No user action is necessary.

Load ESCON Normal display during boot. Wait for IPL to complete.

Load (FSC) Load/unload operation has failed. If another tape also fails load, IPL

drive. If failure persists, replace

drive. If another tape works, tape

is suspect.

Load SCSI Normal display during boot. Wait for IPL to complete.

Locating Drive is doing a high speed seek. No user action is necessary.

Memory Err RAM failed during IPL. IPL again. If that fails, replace

drive.

NT Ready F Non-write protected tape is in

process of manual unload.

Wait until unload operation

completes.

NT Ready U Write protected tape is in process

of manual unload.

Wait until operation completes.

Online The drive is operational. No user action is necessary.

Power Fail Power supply has failed. Replace power supply.

Reading The drive is in the read mode. No user action is necessary.

Ready F Loaded tape is file protected. Operator discretion.

Ready U Loaded tape is not file protected. Operator discretion.

Rewinding The drive is rewinding. No user action is necessary.

Save Fails New configuration cannot be

saved.

Replace drive.

Table A-1. Operator Panel Displays

Display Probable Cause Recommended Action

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 85 86

Komentarze do niniejszej Instrukcji

Brak uwag

Hp Integrity NonStop H-Series Instrukcja Użytkownika Strona 59

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp Integrity NonStop H-Series