Hp Multi-Site Traffic Director sa9200 Instrukcja Użytkownika Strona 137

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 208
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 136
C H A P T E R 6 DNS Commands
131
aliasing
Enables or disables IP aliasing. The show dns flash info
command displays whether aliasing is enabled or disabled.
max-delay
Sets the maximum time delayed before a response is returned,
setting the maximum tolerated network latency between peer
Flash agents. Default value is 5000ms. Range is 0 to 30,000ms.
Syntax:
config dns flash max-delay <number>
poll-interval
Specifies the interval, in seconds, at which a Flash agent polls its
peer agents to determine the network latency to each peer. Default
value is 10 seconds. Range is 1 to 255.
Syntax:
config dns flash poll-interval <number>
num-polls
Defines the number of data points involved in calculating the
average network latency to a Flash agent. Each data point is the
result of one completed poll. The default value is 100. Range is
10 to 255.
Syntax:
config dns flash num-polls <number>
drop-miss
Specifies the number of consecutive missed poll responses
allowed before a flash peer is marked unavailable.
Command Description
Config DNS Flash Commands
Przeglądanie stron 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 207 208

Komentarze do niniejszej Instrukcji

Brak uwag