Hp Multi-Site Traffic Director sa9200 Instrukcja Użytkownika Strona 63

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 208
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 62
C H A P T E R 5 Accessing the Boot Monitor
57
Boot Monitor
Command
Reference
The Boot Monitor contains the following commands:
Command Description
autoboot
Used to enable or disable the Autoboot function. When Autoboot is
enabled, during startup the SA9200 prompts you to press any key to
enter the Boot Monitor command line interface. If you ignore the
prompt, startup concludes with the SA9200 in normal operating mode
(displaying the HP SA9200# prompt). When Autoboot is disabled, the
startup sequence is interrupted and displays the Boot Monitor interface
(displaying the monitor> prompt). Autoboot is enabled by default.
To enable Autoboot, press Enter to accept the default enable. To
disable, enter disable, then press Enter.
Example:
monitor>autoboot
Autoboot? [enable]--->
Boot Monitor Command Reference
Przeglądanie stron 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 207 208

Komentarze do niniejszej Instrukcji

Brak uwag