Hp ProLiant BL680c G7 Server-Blade Instrukcja Użytkownika Pobierz pdf (Strona 62)

Hardware options installation 62

CAUTION: Always wear an antistatic wrist strap when working inside the server.

To install the component:

1. Power down the server blade (on page 16).

2. Remove the server blade (on page 17).

3. Place the server blade on a flat, level surface with the correct side of the server blade facing up. To

determine the correct side, see the label attached to the access panel.

4. Remove the access panel (A-side).

5. Remove the mezzanine connector cover.

6. Align the mezzanine connector on the optional mezzanine card with the mezzanine connector on the

system board.

CAUTION: To prevent damage to the server blade, apply pressure over the mezzanine

connector when installing the mezzanine card. Do not apply pressure to the edges of the card.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 133 134

Brak uwag

Hp ProLiant BL680c G7 Server-Blade Instrukcja Użytkownika Strona 62