Hp DX2000 Instrukcja Użytkownika Pobierz pdf (Strona 60)

6–18 359782-002 Service Reference Guide, dx2000 uT

Removal and Replacement Procedures— Microtower (µT) Chassis

6.12 Processor and Heatsink

1. Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).

2. Remove the right access panels (Section 6.2, “Access Panel”).

3. Lay the computer down on its side to make it easier to work on.

4. Use a long, slender screwdriver to unscrew the four processor retaining screws 1.

✎

The spring-loaded retaining screws are captive to the heatsink.

5. Twist the heatsink to break the bond between it and the processor and lift the heatsink from

the processor 2.

6. Raise the handle on the ZIF socket to the full-open position 3.

7. Grasp the processor by the edges and pull it straight up from the socket 4.

To install the processor and heatsink, reverse the removal procedures.

CAUTION: When installing the heatsink, insert all four screw loosely and then tighten them in a X

pattern to ensure the heatsink is properly seated.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 105 106

Brak uwag

Hp DX2000 Instrukcja Użytkownika Strona 60