HP ProDesk 600 G3 Base Model Small Form Factor PC Instrukcja Użytkownika Pobierz pdf (Strona 64)

System board

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the access panel (Access panel on page 21).

3. Remove the drive cage (Drive cage on page 25).

4. When replacing the system board, make sure the following components are removed from the defective

system board and installed on the replacement system board:

●

Memory modules (Memory on page 26)

●

Expansion cards (Expansion card on page 29)

●

Fan sink (Fan sink on page 45)

●

Processor (Processor on page 46)

5. Disconnect all data and power cables from the system board.

6. Remove the front panel by rotating the left side of the panel upward (1), and then lifting the panel o

the front of the computer (2).

56 Chapter 4 Removal and replacement procedures: Small Form Factor

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 149 150

Brak uwag

HP ProDesk 600 G3 Base Model Small Form Factor PC Instrukcja Użytkownika Strona 64