HP 100BaseT Podręcznik Użytkownika Pobierz pdf (Strona 115)

HP 100Base-T Hubs Installation and Reference Guide

Hardware Reference 5-11

Network Connections

The front panel on the HP 100Base-T Hubs provide the

following network options:

• Connections to end-node devices using RJ-45 station ports.

• Cascaded connection to a compatible switch or router using

the cascade port.

• Extended network connection using the Switch Port Modules

for 10/100Base-TX or 100Base-FX.

Station Ports

The hub has 12 or 24 RJ-45 station ports that can be used to

connect end-node devices (e.g., file servers, workstations or

printers). Be sure you have a Fast Ethernet LAN adapter

installed in the device to be connected to the hub. Then

connect it to any available RJ-45 station port on the hub (i.e.,

1X ~ 12MDI-X) using straight-through shielded or unshielded

(100

W STP or UTP) twisted-pair cable.

Cascade Port

A compatible switch or other network interconnection device can

be attached to the 12MDI/24MDI cascade port. Use straight-

through shielded or unshielded (100

W STP or UTP) twisted-pair

cable to connect to an MDI-X station port on the target device.

Refer to the section on

0DNLQJD&RQQHFWLRQYLDWKH0',&DVFDGH3RUW in

Chapter 2 for a detailed description on cascading.

Note: This device is a Class I repeater and cannot be cascaded to

another hub within the same collision domain.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 156 157

Brak uwag

HP 100BaseT Podręcznik Użytkownika Strona 115