HP 10BASE-T Instrukcja Instalacji Pobierz pdf (Strona 12)

HP AdvanceStack 10BT Switching Hubs Installation Guide

To use a telco connector:

To remove a telco connector, reverse this process.

AUI/Xcvr Slot

An optional transceiver module can be installed in the hub’s AUI/Xcvr slot to provide additional

connectivity choices, including:

Do not use this port for Switching Hub to Switching Hub connections in the stack. See the

documentation accompanying the optional transceiver modules for cabling configurations for those

modules. To use an external transceiver on a hub, the SQE Test and Loopback Test options, if present,

1. Attach the mounting hook with the 1/2-inch 4-40 screw.

2. Insert hook in slot on the hub’s face.

4. Tighten the screw on the telco plug. Be careful not to overtighten the

3. Pivot the telco plug onto the connector and press into place.

screw.

HP Fiber-Optic Transceiver Module (HP J2606A)

HP Twisted-Pair Transceiver Module (HP J2607A

HP ThinLAN Transceiver Module (HP J2608A)

HP AUI Port Module (HP J2609A)

(to attach external transceivers)

Maximum Distance: 1000 meters

Category 3, 4 maximum Distance: 100 meters

Maximum distance: 185 meters

Category 5 maximum Distance: 150 meters

0_INSTAL.FM5 Page 12 Friday, August 9, 1996 4:28 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16

Brak uwag

HP 10BASE-T Instrukcja Instalacji Strona 12