HP 2000CP 2500CP Instrukcja Użytkownika Pobierz pdf (Strona 110)

100

101

4-24 Service Tests

HP DesignJet CP Series Printers

D10. Cutter

The purpose of this test is to verify the operation of the Cutter Assembly.

IF POSSIBLE ALWAYS PERFORM THIS TEST BEFORE

REPLACING THE CUTTER ASSEMBLY. IF THIS TEST PASSES, DO

NOT REPLACE THE CUTTER ASSEMBLY.

Perform the Cutter test as follows:

1 In the Diagnostics submenu, scroll to “D10 Cutter” and press Enter.

Diagnostics

D10 Cutter

2 While the test is being performed, a row of “***” will be displayed on the

front-panel. During the test, the Carriage picks up the cutter and runs it

along the length of the printer twice.

3 Once the test is completed, the “D1000 Done” message is displayed on

the front-panel.

If the carriage picks up the Cutter Assembly and runs it along the

length of the printer twice, then the test has passed.

IF THIS TEST PASSES, DO NOT REPLACE THE CUTTER

ASSEMBLY.

If the carriage does not pick up the Cutter Assembly then the test has

failed. To resolve the problem, try one of the following:

1 Check if the Cutter has been disabled through the front-panel (Device

Setup / Cutter).

2 Perform the Carriage test  page 4-12.

3 Replace the Cutter Assembly  page 8-48.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 347 348

Komentarze do niniejszej Instrukcji

Brak uwag

HP 2000CP 2500CP Instrukcja Użytkownika Strona 110

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Drukuj i skanuj HP 2000CP 2500CP