HP 2000CP 2500CP Instrukcja Użytkownika Strona 302

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 301
Removal and Installation
8-81
HP DesignJet CP Series Printers
Roll Cover and Roll Feed Assemblies
Refer to figure 27 page 8-83
Removal

Switch off the printer and remove the power cord.
1. Remove the following:
1. Window and Top Cover page 8-15.
2. Left Hand Cover page 8-18.
3. Right Hand Cover page 8-21.
4. Service Station Assembly page 8-26.
2. Remove the spindle assembly (item 1) by pulling it towards you on the
right side.

The two springs on the roll cover are under high tension.
3. Remove the two T-10 screws (item 2) securing the two springs (item 3)
onto the roll cover (item 4)
4. Loosen the two nuts (item 5) on the adjustment bracket on the left side
to remove the cover.
5. Remove the three T-20 screws (item 6) securing the left hand roll feed
assembly to the left hand side chassis.
6. Remove the three T-20 screws (item 7) securing the right hand roll feed
assembly to the right hand side chassis.
Przeglądanie stron 301
1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 347 348

Komentarze do niniejszej Instrukcji

Brak uwag