HP PROCURVE 2300 Instrukcja Użytkownika Strona 77
- Strona / 270
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
66
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
Show Commands for Port-Access Supplicant
Note on Supplicant Statistics. For each port configured as a supplicant, show port-access suppli-
cant statistics [e] < port-list >] displays the source MAC address and statistics for transactions with the
authenticator device most recently detected on the port. If the link between the supplicant port and
the authenticator device fails, the supplicant port continues to show data received from the connec-
tion to the most recent authenticator device until one of the following occurs:
■ The supplicant port detects a different authenticator device.
■ You use the aaa port-access supplicant [e] < port-list > clear-statistics command to clear the
statistics for the supplicant port.
■ The switch reboots.
Thus, if the supplicant’s link to the authenticator fails, the supplicant retains the transaction statistics
it most recently received until one of the above events occurs. Also, if you move a link with an
authenticator from one supplicant port to another without clearing the statistics data from the first
port, the authenticator’s MAC address will appear in the supplicant statistics for both ports.
Syntax: show port-access supplicant [[e] < port-list >] [statistics]
show port-access supplicant [[e] < port-list >]
Shows the port-access supplicant configuration
(excluding the secret parameter) for all ports or < port-
list > ports configured on the switch as supplicants. The
Supplicant State can include the following:
Connecting - Starting authentication.
Authenticated - Authentication completed (regardless
of whether the attempt was successful).
Acquired - The port received a request for
identification from an authenticator.
Authenticating - Authentication is in progress.
Held - Authenticator sent notice of failure. The
supplicant port is waiting for the authenticator’s
held-period (page 59).
For descriptions of the supplicant parameters, refer to
“Configuring a Supplicant Switch Port” on page 59.
show port-access supplicant [[e] < port-list >] statistics
Shows the port-access statistics and source MAC
address(es) for all ports or < port-list > ports configured
on the switch as supplicants. See the “Note on Suppli-
cant Statistics”, below.
- Release Notes: 1
- Disclaimer 3
- Warranty 3
- Contents 4
- Software Management 12
- TFTP Download from a Server 13
- Implementation of LLDP 18
- LLDP Terminology 18
- General LLDP Operation 19
- LLDP Configuration Options 19
- LLDP Standards Compatibility 20
- LLDP Operating Rules 21
- LLDP Operation and Commands 22
- Viewing LLDP-detected Devices 23
- Disable Auto-MDIX 25
- New Console Option 26
- Syslog Overview 27
- Syslog Operation 27
- ■ Switch Series 2800 29
- Configuring Syslog Logging 30
- Operating Notes for Syslog 31
- General Features 41
- How 802.1X Operates 42
- Authenticator Operation 42
- Note on 802.1X and LACP 46
- 802.1X Open VLAN Mode 55
- Introduction 55
- Only 802.1X Devices 66
- Connections to Other Switches 68
- Status Indicator Meaning 76
- ■ The switch reboots 77
- IGMP Version 3 Support 82
- Friendly port names assigned 86
- Friendly Port Name 87
- ■ 3DES (168-bit) 90
- ■ DES (56-bit) 90
- Prerequisite for Using SSH 91
- Public Key Format Requirement 91
- Host Public Key 97
- Note on the Public Key Format 98
- Hexadecimal "Hash" 100
- Public Key 100
- Phonetic "Hash" of 100
- Switch’s Public Key 100
- ■ Execute no ip ssh 101
- Note on Port Number 102
- Bit Size Public Index 107
- Note on Public Keys 109
- Troubleshooting SSH Operation 112
- ■ Serial port (Console) 113
- ■ Telnet 113
- ■ Port-Access 113
- Terminology 114
- Preparation: 115
- The switch now allows 119
- Telnet and SSH 119
- Local Authentication Process 124
- Configuring RADIUS Accounting 125
- ■ IP address: 10.33.18.151 129
- ■ Start-Stop: 131
- ■ Stop-Only: 131
- Viewing RADIUS Statistics 132
- RADIUS Authentication 135
- RADIUS Accounting 136
- as both the primary 138
- Global RADIUS Encryption Key 139
- Configuration File Downloads 140
- Session 2 is an active 147
- Telnet session 147
- The kill 2 command 147
- Overview 148
- Configuring RSTP 150
- Note on Path Cost 156
- The asterisk indicates that 164
- 5. Press 166
- Operating Notes 171
- Fast-Uplink Troubleshooting 172
- Access Security 176
- General System Requirements 179
- TACACS+ Operation 180
- Note on Privilege Levels 181
- First-Choice TACACS+ Server 190
- How Authentication Operates 192
- Using the Encryption Key 194
- General Operation 194
- Authentication 195
- Messages 196
- 2. Switch Configuration 199
- 1. System Information 199
- TimeP Time Synchronization 200
- SNTP Time Synchronization 200
- Time Protocol Operation 200
- Table 15. SNTP Parameters 202
- – TIMEP 203
- Broadcast as the SNTP mode 206
- Broadcast 208
- Table 16. Timep Parameters 210
- – TIMEP (the default) 211
- Time Sync 213
- Manual mode enables 214
- DHCP as 215
- Address Prioritization 216
- Configured 218
- Control (IGMP) 219
- Fast-Leave IGMP 221
- Forced Fast-Leave IGMP 223
- 2 at the 224
- 7 specifies port 7 224
- Verification 225
- Querier Operation 226
- Switch Memory Operation 227
- Addresses Across a Reboot 228
- Configuration Guide 231
- Time Protocol Changes 232
- Passwords 233
- Software Fixes 237
- Release F.01.08 240
- Release F.01.10 240
- Release F.02.02 240
- Release F.02.03 242
- Release F.02.09 246
- Release F.02.10 246
- Release F.02.11 246
- Release F.02.12 247
- Release F.02.13 247
- Release F.04.08 249
- Release F.05.14 254
- Release F.05.17 258
- Release F.05.18 258
- Release F.05.22 259
- Release F.05.33 263
- Release F.05.34 263
- Release F.05.52 265
- Release F.05.55 266
- Release F.05.59 267
- Release F.05.60 267
- Release F.05.61 267
- Release F.05.68 268
- Release F.05.69 269
- Release F.05.70 269
Powiązane produkty i podręczniki dla Oprogramowanie HP PROCURVE 2300
Oprogramowanie HP B6191-90028 Instrukcja Użytkownika
(115 strony)
(115 strony)
Oprogramowanie HP 4000M Instrukcja Użytkownika
(304 strony)
(304 strony)
Oprogramowanie HP Netsight Instrukcja Użytkownika
(238 strony)
(238 strony)
Oprogramowanie HP P9500 Instrukcja Użytkownika
(494 strony)
(494 strony)
Oprogramowanie HP X9320 Instrukcja Użytkownika
(125 strony)
(125 strony)
Oprogramowanie HP AA-RS29F-TE Instrukcja Użytkownika
(141 strony)
(141 strony)
Oprogramowanie HP D2D Instrukcja Użytkownika
(93 strony)
(93 strony)
Oprogramowanie HP XP12000 Instrukcja Użytkownika
(118 strony)
(118 strony)
Oprogramowanie HP SENTRY Instrukcja Użytkownika
(113 strony)
(113 strony)
Oprogramowanie HP 6500 Series Instrukcja Użytkownika
(265 strony)
(265 strony)
Oprogramowanie HP 3PAR Instrukcja Użytkownika
(63 strony)
(63 strony)
Oprogramowanie HP M208 Instrukcja Użytkownika
(224 strony)
(224 strony)
Hoshizaki DCM-500BWH-OS manuels
Manuels d'utilisation et guides de l'utilisateur pour Congélateurs Hoshizaki DCM-500BWH-OS.
Nous fournissons des manuels en pdf 1 Hoshizaki DCM-500BWH-OS à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji