Hp StoreEver Ultrium Tape Drives Instrukcja Użytkownika Pobierz pdf (Strona 34)

Figure 30 Front view of earlier LTO Ultrium external tape drives

5. Drive LED1. On/Off switch (external drives only)

6. Tape LED2. Eject button

7. Clean LED3. Emergency reset button

4. Ready LED

Loading a cartridge

1. Insert the cartridge into the slot in the front of the drive with the arrow uppermost and facing

the drive door(2).

Figure 31 Inserting a cartridge

2. Arrow indicates leading direction1. Label area

3. Ready light

2. Apply gentle pressure until the drive takes the cartridge and loads it. (See figure above.)

3. The Ready light (3) flashes green while the drive performs its load sequence. When the cartridge

is loaded, the Ready light shows steady green.

Unloading a cartridge

CAUTION: Never try to remove a cartridge before it is fully ejected.

34 Operating your tape drive

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 60 61

Brak uwag

Hp StoreEver Ultrium Tape Drives Instrukcja Użytkownika Strona 34