Hp Netserver E Server series Instrukcja Użytkownika Pobierz pdf (Strona 41)

Chapter 5 Error Message Reference

Code Description Recommended Action

twice.

0097h DiagTools Error Download a new version of DiagTools from the HP web site and run it. If you get

the same error, call the HP Customer Care Center.

0098h DiagTools Error Download a new version of DiagTools from the HP web site and run it. If you get

the same error, call the HP Customer Care Center.

0099h DiagTools Error Download a new version of DiagTools from the HP web site and run it. If you get

the same error, call the HP Customer Care Center.

009Ah PnP function 40

failed.

Replace System BIOS.

009Bh Invalid number of

PnP cards.

009Ch One or more

unknown PnP cards.

Check all PnP devices.

009Dh No PCI bus system

device Node.

1. If necessary, update the BIOS.

2. Clear the CMOS and rerun configuration. See directions on the technical

reference label or card.

3. Make sure the system board is seated.

4. Check the seating of the voltage regulator module (VRM) if present.

5. Be sure the processor board (if any) is seated.

6. Make sure the CPU chip is seated. (Take ESD precautions.)

7. Make sure the memory elements (DIMMs) are properly seated.

8. Check system fans. If overheating occurs, chip may shut down.

9. If the system ran with temperature high, let it cool for 30 minutes, then restart.

10. If system repeatedly shows this error, replace the element with the CMOS.

009Eh Too many PCI

busses.

1. Run the BIOS Setup program and reconfigure all settings.

2. If necessary, update the BIOS.

3. Clear the CMOS and rerun configuration. See directions on the technical

reference label or card.

4. Make sure the system board is seated.

5. Check the seating of the voltage regulator module (VRM) if present.

6. Be sure the processor board (if any) is seated.

7. Make sure the CPU chip is seated. (Take ESD precautions.)

8. Make sure the memory elements (DIMMs) are properly seated.

9. Check system fans. If overheating occurs, chip may shut down.

10. If the system ran with temperature high, let it cool for 30 minutes, then

restart.

11. If system repeatedly shows this error, replace the element with the CMOS.

009Fh DiagTools Error Download a new version of DiagTools from the HP web site and run it. If you get

the same error, call the HP Customer Care Center.

00A0h PnP function 41

failed.

1. Run the BIOS Setup program and reconfigure all settings.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 84 85

Komentarze do niniejszej Instrukcji

Brak uwag

Hp Netserver E Server series Instrukcja Użytkownika Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp Netserver E Server series