Hp Netserver L Server series Instrukcja Użytkownika Pobierz pdf (Strona 30)

Chapter 3 Installing Mass Storage Devices

Figure 3-4. Closing Drive Ejector Arms

5. Verify that the drive is flush with the other drives. If the drive is not flush, it is

not seated properly in the drive slot. Open the ejector arms and repeat Step 3

and 4.

Make sure that you open the ejector arms wide before inserting the drive in

the slot. Push the drive in completely before attempting to close the ejector

arms.

Removing Hot Swap Hard Drives

CAUTION Remove the drive slowly. Wait for the drive heads to park

before completely removing the drive. Follow the instructions

carefully to prevent damage to the drive head and head

actuator.

1. To unlock the drive, insert your thumb into the opening at the center of the

drive and pull the ejector arms outward until they click into the open position.

See Figure 3-5.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 145 146

Brak uwag

Hp Netserver L Server series Instrukcja Użytkownika Strona 30