Hp Netserver L Server series Instrukcja Użytkownika Pobierz pdf (Strona 72)

Chapter 7 Rack Mounting the HP Netserver (4-Post)

Installing Slides in the Rack

1. Ensure the rack is stabilized.

For HP system /E or /U racks, pull the anti-tip foot forward out of the bottom

of the rack and lower the leveler screws to make firm contact with the floor.

See Figure 7-3.

Anti-tip Foot

Extended

Leveler

Screws (4)

Figure 7-3. Installing Slides in the Rack

2. Insert the rear slide mounting pins into holes you have marked on the rear

column. Then push in on the front of the slide and snap the front mounting

pins into holes marked on the front column.

The slide mounting pins insert into the inside face of the rear column and the

front face of the front column. See Figure 7-3.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 145 146

Brak uwag

Hp Netserver L Server series Instrukcja Użytkownika Strona 72