Hp Netserver L Server series Instrukcja Użytkownika Pobierz pdf (Strona 30)

Chapter 5 Installing Additional Memory

NOTE Use only HP DIMMs listed in HP Information Assistant or HP

Order Assistant.

Installing Additional Memory in the LH 4

1. Turn OFF the NetServer and remove all cables from the rear of the

NetServer. Pull both power plugs out.

2. Remove cover 3 and the bezel (see Chapter 3, "Removing and Replacing

Covers").

3. Loosen the memory cage screw, and swing the cover open (see Figure 5-

2).

Figure 5-2. Memory Cage

4. Unseat each memory board with the release clips, and remove the two

boards (see Figure 5-3).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 125 126

Brak uwag

Hp Netserver L Server series Instrukcja Użytkownika Strona 30