Hp ProLiant DL585 Server Instrukcja Użytkownika Pobierz pdf (Strona 149)

System LEDs and switches

HP ProLiant DL585 Server User Guide E-13

Table E-10: QuickFind diagnostic display LEDs continued

Item Description Status Action

3 Processor

memory board

Off = Normal

On = Attention required

Processor memory board power failure. If

problem persists, replace the processor or

processor memory board.

4 Processor

power module

Off = Normal

On = Attention required

PPM power failure. If problem persists,

replace PPM.

If the PPM and the BRD LEDs are both on,

there is a configuration error.

5 Temperature Off = Normal

On = Attention required

One or more components have

experienced an elevated temperature or a

thermal shutdown.

A thermal shutdown is indicated by the

Therm Trip LED.

• Be sure the processor

heatsink is properly attached.

• Be sure there are no 1.7"

DIMMs installed that prevent airflow

across the processor heatsink).

• Be sure that all fans are

installed and working properly.

• Be sure that the server

environment meets posted

requirements.

For information about server environment

requirements refer to the “Optimum

environment” section in Chapter 3.

6 DIMM Off = Normal

On = Attention required

DIMM failure or configuration error. Refer to

the IML or POST messages

7 I/O power fault Off = Normal

On = Attention required

A power fault on the system I/O board

occurred. If problem persists, replace the

system I/O board.

continued

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 182 183

Komentarze do niniejszej Instrukcji

Brak uwag

Hp ProLiant DL585 Server Instrukcja Użytkownika Strona 149

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp ProLiant DL585 Server