HP C30D Instrukcja Użytkownika Strona 104

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 103
3-52 Troubleshooting Analysis Guide (TAGs)
6
Remove the toner cartridge seal.
Power-on-reset the printer.
Run test prints.
Has the problem been resolved?
No: Continue.
Yes: The toner cartridge seal was at fault. Turn to TAG 002: Check & Problem Resolution.
7
Turn the printer off and unplug the power cord.
Disconnect J/P41.
Remove the developer unit.
Check P41-48 to J25-6 for continuity.
Is there continuity?
No: Repair or replace the connectors or wiring from P41-48 to J25-6, then turn to TAG 002:
Check & Problem Resolution.
Yes: Replace the PCL board. If this resolves the problem, then turn to TAG 002: Check &
Problem Resolution. If the problem is still not resolved, go to TAG 610: Operator Panel
Malfunction.
Przeglądanie stron 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 482 483

Komentarze do niniejszej Instrukcji

Brak uwag