HP RP7 Retail System Model 7100 Instrukcja Użytkownika Pobierz pdf (Strona 11)

Technical white paper | AHCI and RAID on HP EliteDesk and EliteOne 800 Business PCs

Unsupported configurations

HP rp7800, rp5810, and rp5800 Retail Systems only support configurations offering the best user experience and highest

possible reliability. As a result, HP does not support the following combinations of RAID hard drives:

• Different sizes

• Different speeds (5400 rpm, 7200 rpm, etc)

• Old and new technologies (SATA 1.5 GB and SATA 3.0 GB)

• NCQ hard drives and non-NCQ drives

• Different cache size

• RAID combinations of hard drives with any operating system other than Windows 7 or Windows 8 using Microsoft’s IDE

driver stack based on ATAPI.SYS

Configuring RAID on non-factory preinstalled configurations

The remaining sections of this white paper describe steps to set up supported RAID configurations where customers have

not purchased factory preinstalled RAID configurations.

Enabling RAID through F10 System BIOS

For enabling RAID on Windows 7 and/or legacy platforms, RAID is enabled using the Setup Utility, accessed through F10

during a system boot.

1. Turn on or restart the computer by clicking Start > Shut Down > Restart the Computer.

2. Press F10 as soon as the monitor light turns green. If you do not press F10 at the appropriate time, you must restart

the computer, and then press F10 again to access the utility.

3. Select your language from the list, and then press Enter.

4. Use the arrow keys to select Storage.

5. Use the down arrow key to select Storage Options, and then press Enter.

6. On the Storage Options menu, use the down arrow key to select SATA Emulation.

7. Press the right arrow key until the RAID option appears, and then press F10 to accept.

8. To apply and save changes, select File > Save Changes and Exit.

CAUTION

Do NOT turn the computer power off while the ROM is saving the F10 Computer Setup changes, otherwise the CMOS could

become corrupted. Only turn the computer off after exiting the F10 Setup screen.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Brak uwag

HP RP7 Retail System Model 7100 Instrukcja Użytkownika Strona 11