HP RP7 Retail System Model 7100 Instrukcja Użytkownika Strona 23

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 27
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 22
Technical white paper | AHCI and RAID on HP EliteDesk and EliteOne 800 Business PCs
23
9. To create two volumes based on your space, reliability and performance needs, select the size of the first RAID volume
by sliding the bar or entering the desired volume size. For example, divide in half the available hard drive storage in two
RAID volumes by setting the Percentage of Available Space to 50%, so that 50% of drive capacity is used for RAID 0.
10. Click Next.
11. Click Finish to start the migration process, which can take a few hours.
12. Reboot the system after the migration finishes.
Note
Back up all data before proceeding.
13. After the first RAID volume has been created, create the second RAID volume by opening the Intel Rapid Storage
Console, clicking View > Advanced Mode, and then clicking Actions/Create RAID Volume from Existing Hard Drive.
14. Click Next.
15. Use the same values you entered in the previous RAID volume confirmation and type the RAID Volume Name, select
the RAID Level (for three hard drive RAID 0 or RAID 5 only), and select the Strip Size.
Note
HP currently supports only the default Strip Size (in this case 128KB).
16. Click Next to see the selection of hard drives that will be part of this RAID volume.
17. Since this is the second volume for this set of hard drives, select the existing name in the Available box (Array 0000),
and then click the right arrow to move this array into the Selected box.
18. Click Next. The Specify Volume Size screen is grayed out because the second volume of this Matrix RAID Mode takes the
remaining space. After the selection of all hard drive members of this RAID volume, follow the volume size selection
screen.
Note
The first array volume creation is the place for adjusting the size; the second volume will take any remaining space.
19. While creating the second RAID volume, click Next to open the completion window.
20. Select Finish to start the migration process, which can take a few hours. You can see the state of the Matrix RAID Mode
created by opening the Intel Rapid Storage Console and clicking View > Advanced Mode.
Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives
The migration process for two hard drives to RAID Matrix Mode (0 + 1) is very similar to the process described in the section
about migration of three hard drives to matrix mode RAID (0 + 5). The difference in the process is selecting two hard drives
as part of the volume created and selecting RAID 5 instead of RAID 1.
Przeglądanie stron 22
1 2 ... 18 19 20 21 22 23 24 25 26 27

Komentarze do niniejszej Instrukcji

Brak uwag