Hp StorageWorks 1510i Modular Smart Array Instrukcja Użytkownika Pobierz pdf (Strona 35)

5. Enter the settings for the management port.

NOTE:

• Port State must be

Enabled

(default) to use the SMU. If the management port state was

disabled,youmustusetheCommandLineInterface(CLI)tore-enableit.(Formore

information, see the Command Line Interface user guide.)

•AssignaHost Name to the storage system (default: chassis serial number). HP

recommends changing this to a more helpful user-deﬁned value.

• Port Name MA0 is the default management port. Although other ports can be

conﬁgured as the primary management port, HP recommends conﬁguring and using

the default.

• To control the path of management trafﬁc to and from the array controller and to

add one level of system security, HP recommends assigning a static IP address to the

management port that is in a different LAN segment than the data ports. To assign

a static IP address, expand the DHCP Setting drop-down box and change the setting

to Disabled. The page expands (shown), showing the currently assigned IP address.

Change this to the address you want to use for management trafﬁc. After changing the

IP address, you may need to re-connect to the SMU using the newly assigned IP address.

•Bydefault,VLAN ID is 0, meaning that trafﬁc ﬂowing from the port to the switch will be

untagged.ToassignaVLANforthisporttouse,enteritsvalue.VLANsaresetupon

theswitch,andareusedasonemethodofcontrollingaccesstothestoragesystem.

IMPORTANT:

For dual-controller conﬁ gurations, repeat these steps to conﬁgure the management port on the other

controller.

• The default management port for controller A is MA0.

• The default management port for controller B is MB0.

Conﬁguring data ports

Conﬁguring each data port includes two steps:

• Assigning one or more IP addresses to the port (Step 1).

• Assigning one or more TCP portals to each IP address (Step 4).

IMPORTANT:

Conﬁ gure all data ports you plan to use, including ports on the Ethernet iSCSI module associated

with the controller in slot 2, if installed.

HP Storage Management Utility user guide

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 98 99

Brak uwag

Hp StorageWorks 1510i Modular Smart Array Instrukcja Użytkownika Strona 35