Hp StorageWorks 1510i Modular Smart Array Instrukcja Użytkownika Pobierz pdf (Strona 37)

4. Select IP Address > Create Portal.

5. Enter settings for the portal.

NOTE:

For additional security, do not use commonly-known TCP ports.

6. When the display refreshes, verify that the newly conﬁgured portal is shown in the component list.

7. Asneededforyourenvironment,repeatStep 4 through Step 6 to assign additional TCP ports to

this IP address.

8. Repeat Step 1 through Step 7 to add additional IP addresses to this data port or to conﬁgure the

remainingdataports,suchasSA1,SB0,andSB1.

Sample conﬁguration status - after conﬁguring management and data ports

Figure 10 illustrates the current conﬁguration.

The following items are conﬁgured:

• Management port MA0 and MB0

• DataportsSA0,SA1,SB0,andSB1

• Each data port is assigned two (2) IP addresses

•EachIPaddressisassignedtwo(2)TCPportals

HP Storage Management Utility user guide

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 98 99

Brak uwag

Hp StorageWorks 1510i Modular Smart Array Instrukcja Użytkownika Strona 37