Hp NetRAID-4M Controller Instrukcja Użytkownika Pobierz pdf (Strona 57)

4-7

Working with Disks

controller. To determine the usage of your disks, use the disk list

command. Table 4-2 shows the possible disk usage values:

Table 4-2. Disk Usage Values.

In the following example, the Usage column indicates that device

2:01:0 is initialized for use with containers.

HPN0> disk list

Executing: disk list

C:ID:L Device Type Blocks Bytes/Block Usage Shared

------ ----------- --------- ----------- ---------------- ------

2:01:0 Disk 17783240 512 Initialized NO

2:02:0 Disk 17783240 512 Initialized NO

Displaying Disk Defects

The disk defect attribute indicates the following:

■ The total number and location of primary defects on a disk.

Primary defects are disk defects that originate during the

manufacturing of a disk.

To display the location and number of primary defects on a

disk connected to your RAID controller, use the disk show

defects command. The following example shows the output

Value Meaning

DOS The SCSI device was prepared for use

with DOS partitions.

Initialized The SCSI device was prepared (initialized)

for use with containers. This is the value

that appears in the example.

Not initialized The SCSI device was not prepared

(initialized) for use with containers

Offline The SCSI device was present at boot time;

however, the device is either removed

from the controller or it failed.

Unknown The SCSI device is not owned by the

controller.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 335 336

Brak uwag

Hp NetRAID-4M Controller Instrukcja Użytkownika Strona 57