Hp ProLiant BL495c G6 Server-Blade Instrukcja Użytkownika Strona 39
- Strona / 90
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
• iLO virtual floppy (on page 39)
page 36)
To d o
1.
ge file of the boot diskette.
ot diskette to a location on the network or the client PC hard drive.
through iLO 2. See "HP BladeSystem c-Class advanced
3. edia tab.
al CD to
the server blade.
er Button feature to reboot the server blade.
ils,
from
• PXE ("PXE deployment" on
iLO virtual floppy
epl y with a boot diskette:
Do one of the following:
o Insert the boot diskette into the client PC using the iLO 2 Remote Console.
o Use iLO 2 to create an ima
o Copy the image of the bo
2. Remotely access the server blade
management
(on page 34)."
Click the Virtual M
4. Select the Virtual Media applet.
5. Use the Virtual Media applet to select the local diskette or image file and connect the Virtu
6. Use the iLO 2 Virtual Pow
7. After the server blade boots, follow the normal network installation procedure for the OS.
Creating a boot diskette
The SmartStart Scripting Toolkit provides the tools and information for creating a boot diskette. For deta
refer to the
SmartStart Scripting Toolkit User Guide and download the latest version of the software
the
HP website (http://www.hp.com/servers/sstoolkit).
As an alternative method, configure the hardware manually with RBSU and the iLO 2 remote cons
With this method, the disk is more generic and integrates with an existing network OS installation
ole.
process. For more information, refer to "
HP BladeSystem c-Class advanced management (on page 34)."
de must have a supported OS. For the latest information on a
site (http://www.hp.com/go/supportos
To operate properly, the server bla
supported OS, refer to the
HP web ).
ls
Smar
loy server configuration. SmartStart has been tested on many ProLiant server products,
lu
• re using embedded configuration utilities, such as RBSU and ORCA
Configuration too
tStart software
SmartStart is a collection of software that optimizes single-server setup, providing a simple and consistent
way to dep
resulting in proven, reliable configurations.
SmartStart assists the deployment process by performing a wide range of configuration activities,
inc ding:
Configuring hardwa
• Preparing the system for installing "off-the-shelf" versions of leading operating system software
• Installing optimized server drivers, management agents, and utilities automatically with every
assisted installation
Software and configuration utilities 39
- User Guide 1
- Intended audience 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs 7
- System board components 8
- System maintenance switch 9
- HP c-Class Blade SUV Cable 10
- Operations 11
- Remove the server blade 12
- Remove the access panel 12
- Install the access panel 13
- Overview 14
- Connecting to the network 17
- Installing a server blade 17
- Completing the configuration 18
- Introduction 19
- Hard drive option 19
- Memory option 20
- Advanced ECC memory 21
- DIMM installation guidelines 21
- DIMM population order 21
- Installing DIMMs 21
- Processor option 23
- Mezzanine card option 28
- Cabling 30
- Network-based PXE deployment 34
- Deployment infrastructure 35
- PXE deployme 36
- CD-RO oyme 37
- M depl nt 37
- Diskette 38
- image deployment 38
- Configuration too 39
- M-Based Setup Utility 40
- Boot options 41
- C nfiguration Utility 42
- Re-enteri 43
- ROMPaq utility 44
- t hnology 44
- Erase Utility 44
- • and the criticality of 46
- Redundant ROM support 47
- • RBSU 48
- • POST 48
- • Diagnostics 48
- • DOS 48
- • Operating environments w 48
- HP Insight D 49
- Integrated Management Log 49
- Keeping the system current 50
- • Works offline and online 51
- Care Pack 52
- Troubleshooting 53
- Importa s 54
- Symptom information 55
- Service notifications 56
- Loose connections 56
- Troubleshooting flowcharts 56
- Start diagnosis flowchart 57
- General diagnosis flowchart 58
- • The server does not p 60
- POST problems flowchart 62
- Item Refer to 63
- • the HP ProLiant Servers 63
- OS boot problems flowchart 64
- • Hard drive s 65
- • rve or 66
- • Redundancy failure 67
- Troubleshooting 68 68
- Battery replacement 69
- Class B equipment 70
- FCC rating label 70
- Class A equipment 70
- Modifications 71
- • Low Voltag 72
- • EMC Dir 72
- Japanese notice 73
- BSMI notice 73
- Korean notice 73
- Laser compliance 74
- Electrostatic discharge 76
- Specifications 77
- Technical support 78
- Technical support 79 79
- • Obbligatorie – Parti che d 80
- Technical support 81 81
- Customer Self Repair 82
- Reparo feito pelo cliente 82
- Technical support 83 83
- Technical support 84 84
- Technical support 85 85
- Acronyms and abbreviations 86
- Index 88 88
- Index 89 89
- Index 90 90
Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp ProLiant BL495c G6 Server-Blade
(82 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.067 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji