Hp ProLiant DL385p Gen8 Server Instrukcja Użytkownika Pobierz pdf (Strona 10)

Component identification 10

• LFF

Item Description Status

NIC status LED Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity

Health LED Solid green = Normal

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

Fast-flashing red (4 Hz/cycles per sec) = Power fault*

Power On/Standby button

and system power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Solid amber = System in standby

Off = No power present**

UID button/LED

Solid blue = Activated

Flashing blue (1 Hz/cycle per sec) = Remote management or

firmware upgrade in progress

Off = Deactivated

*To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and

reference the server troubleshooting guide.

**Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has

occurred, or the power button cable is disconnected.

Access the Systems Insight Display

To access the HP Systems Insight Display in a server with an 8-drive LFF configuration:

1. Press and release the panel.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 134 135

Brak uwag

Hp ProLiant DL385p Gen8 Server Instrukcja Użytkownika Strona 10