Hp ProLiant DL385p Gen8 Server Instrukcja Użytkownika Pobierz pdf (Strona 77)

Hardware options installation 77

To install the component:

1. Power down the server (on page 23).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Extend the server from the rack (on page 23).

4. Remove the access panel (on page 25).

5. If a full-length expansion board is installed in slot 1, release the full-length expansion board retainer,

and then remove the primary PCIe riser cage.

6. If a full-length expansion board is installed in slot 4, release the full-length expansion board retainer,

and then remove the secondary PCIe riser cage.

7. Remove the air baffle (on page 34).

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 134 135

Brak uwag

Hp ProLiant DL385p Gen8 Server Instrukcja Użytkownika Strona 77