Hp ProLiant ML110 G7 Server Instrukcja Użytkownika Strona 59
- Strona / 113
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Hardware options installation 59
o
For improved power efficiency and redundancy, install two HP CS power supplies:
12. Remove the four screws, and then loosen the drive cage.
13. Route and connect the redundant power supply cables to the system board.
14. Insert the four screws to tighten the drive cage.
15. Install any device originally installed in the upper optical drive bay.
16. Install the EMI shield in the lower optical drive bay.
17. Install the access panel (on page 21).
18. If the lower optical bay blank is not attached to the tower bezel, install it.
19. Lock the tower bezel.
20. Connect each power cord to the server.
21. Connect each power cord to the power source.
22. Power up the server (on page 19).
- HP ProLiant ML110 G7 Server 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Rear panel components 8
- Rear panel LEDs and buttons 9
- System board components 10
- DIMM slot locations 11
- System maintenance switch 11
- System board LEDs 12
- NMI functionality 12
- SAS and SATA drive numbering 13
- SAS and SATA drive LEDs 14
- BBWC module LEDs 15
- FBWC module LEDs 17
- Fan locations 18
- Operations 19
- Remove the tower bezel 20
- Install the tower bezel 20
- Remove the access panel 21
- Install the access panel 21
- Remove the air baffle 22
- Install the air baffle 22
- Optimum environment 24
- Temperature requirements 25
- Power requirements 25
- Installing hardware options 26
- Setting up a tower server 26
- Setup 28 28
- Registering the server 29
- Introduction 30
- HP product QuickSpecs 30
- SAS and SATA drive options 30
- Drive cage options 32
- Drive LED cable option 37
- Storage controller option 38
- Optical drive option 42
- Memory options 45
- Memory configuration 46
- Installing a DIMM 47
- Expansion board options 48
- RPS enablement option 55
- 9. Install the RPS cage 57
- Cabling 60
- Hot-plug, SATA drive support 61
- Hot-plug, SAS drive support 61
- Eight-bay SFF drive cabling 62
- Optical drive cabling 63
- Power supply cabling 64
- Item Description 65
- Configuration and utilities 66
- Using RBSU 67
- Auto-configuration process 67
- Array Configuration Utility 68
- • Selecting the boot volume 69
- Management tools 70
- Diagnostic tools 71
- Integrated Management Log 72
- Keeping the system current 73
- ProLiant Support Packs 74
- Firmware 74
- HP Smart Update Manager 74
- Care Pack 75
- Troubleshooting 76
- Symbols on equipment 77
- Warnings and cautions 77
- Symptom information 78
- Loose connections 80
- Service notifications 81
- Server health LEDs 81
- Troubleshooting flowcharts 81
- General diagnosis flowchart 82
- Symptoms: 84
- Troubleshooting 86 86
- POST problems flowchart 87
- OS boot problems flowchart 89
- Troubleshooting 90 90
- • Redundancy failure 91
- (http://www.hp.com/support) 92
- Troubleshooting 93 93
- Battery replacement 94
- Regulatory information 95
- Electrostatic discharge 96
- Specifications 97
- • ATX 350W Power Supply 98
- Support and other resources 99
- Customer Self Repair 101
- Reparo feito pelo cliente 103
- Acronyms and abbreviations 107
- Documentation feedback 110
- Index 111 111
- Index 112 112
- Index 113 113
Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp ProLiant ML110 G7 Server
(115 strony)
Audio Authority Motherboards user manuals
The list of Audio Authority Motherboards products contains 1 user manuals for 1 models. All pdf user’s guides are available for download or viewing online.
Komentarze do niniejszej Instrukcji