HP Cloud OS for Moonshot Instrukcja Instalacji Pobierz pdf (Strona 22)

Bridge Enabled = False

On the VLAN tab, do not change:

VLAN Enabled = False

VLANID = 300

On the Router tab, in the Router box, enter the Gateway IP address of your Public IP address

range. The Router Preference default value is 5 and is sufficient.

Note: The Router Preference value indicates the number of hops to reach the destination; the lesser

the value, the higher the priority of the network.

Edit the Public Address Ranges

To edit the public address ranges:

In the public Edit Network drop-down list, select Edit Address Ranges to open the Edit Address Ranges

dialog.

The Network Type and Subnet values are pre-populated by default, with the correct settings.

Click Add Address Range to modify the set of address range options. Each time you click, you modify

another set of address range options, based upon your public network. Get the range from your IT

administrator:

a. Set Node Type to host.

b. Set IPV4 Start Addr to the start of the <External/Public IP Address Range> described above.

c. Set IPV4 End Addr to the end of the <External/Public IP Address Range>. Note: Provide the IP address

range corresponding to the network address.

Click Update Address Ranges to save your changes to validate that the IP address is correct.

Note: If you enter invalid address ranges, you will get a validation error, which identifies the incorrect address

(start or end) for the corresponding network type. You must fix all errors in the Edit Address Ranges dialog

and click Update Address Ranges to validate the addresses are correct.

Customize the Nova_Flat Network

The Nova_Flat network is used for connectivity between the Controller and Baremetal hosts and the Moonshot

cartridges. The Controller node provides DHCP and PXE services for this network. Workloads are provisioned

to the Moonshot cartridges using this network.

page-footer-left

page-footer-right

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Brak uwag

HP Cloud OS for Moonshot Instrukcja Instalacji Strona 22