HP Cloud OS for Moonshot Instrukcja Instalacji Pobierz pdf (Strona 25)

(Optional) Click Add Address Range to add a set of address range options to the bottom of the Edit

Address Ranges dialog box. Each time you click Add Address Range, you add another set of address

range options to be filled in. Note: Provide the IP address range corresponding to the network address.

Click Update Address Ranges to save your changes.

Note: If you enter invalid address ranges, you will get a validation error, which identifies the incorrect address

(start or end) for the corresponding network type. You must fix all errors in the Edit Address Ranges dialog and

click Update Address Ranges to validate the addresses are correct.

Next Step

Proceed to the next topic, Complete Admin Node Installation.

‹ PREV | ^ UP | NEXT ›

Complete Admin Node Installation

This topic describes the steps to complete the Admin Node installation. These steps are required.

Caution: Be sure the values for the Prerequisites, Connections, and Networks are what you need, before you

follow the steps in this topic. Once you click Complete Install, the dialogs are read only. If you want to make

changes, you need to start over by re-installing the Admin Node.

To complete the Admin Node installation:

On the Operational Dashboard, select the Environment tab > Complete Install.

On the confirmation page, specify the following information.

a. Domain Name: Enter the top-level domain name for your cloud. By default, it is set to cloudos.local.

The name you provide must consist of lowercase characters with no numbers or special characters. It may

end in any valid web domain type, such as (but not limited to) .com, .org, .net, .edu, .mil, .gov.

b. Network Mode: The Network Mode is Dual by default. Dual network mode needs two Ethernet cards

and allows you to completely separate traffic to/from the admin network and to/from public network.

Click Complete Install. This action installs underlying components, such as TFTP Boot, DHCP, DNS,

NTP servers, and monitoring tools, on the Admin Node. This may take several minutes. A working status

message displays in the Setup Complete column.

The Operational Dashboard displays a working status message in the Install Complete column. Note: Any

page-footer-left

page-footer-right

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Brak uwag

HP Cloud OS for Moonshot Instrukcja Instalacji Strona 25