HP X Unified Security Platform Series Instrukcja Użytkownika Strona 209

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 333
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 208
IPSec Configuration
X Family LSM User’s Guide V 2.5.1 193
Tunnel Setup
Local Networks Select one of the following methods to determine what local traffic
may access or be accessed from the VPN tunnel. This method is
only used for IPSec tunnel mode connections:
IP Address Group (configure from Network > Configuration >
IP Address Groups) - use this option if traffic allowed over the
VPN tunnel is from multiple IP subnets.
•IP Subnet
•IP Range
Peer uses tunnel as default route
Select this method if you have want the IPSec tunnel to be used as
the default route for the device.
Local addresses assigned by DHCP through this tunnel
Select this method if the connection will be used to connect two X
family devices that have been configured to use DHCP Relay over
VPN.
Remote Networks Select one of the following methods to determine what traffic
should be routed over the VPN tunnel. This method is only used for
IPSec tunnel mode connections:
IP Address Group (configure from Network > Configuration >
IP Address Groups) - use this option if traffic allowed over the
VPN tunnel is from multiple IP subnets.
•IP Subnet
•IP Range
Peer uses tunnel as default route
Select this method if you have want the IPSec tunnel to be used as
the default route for the device.
Local addresses assigned by DHCP through this tunnel
Select this method if the connection will be used to connect two X
family devices that have been configured to use DHCP Relay over
VPN.
Table 7–3: IPSec Security Association Configuration Parameters (Continued)
Parameter Description
Przeglądanie stron 208
1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 332 333

Komentarze do niniejszej Instrukcji

Brak uwag