HP X Unified Security Platform Series Instrukcja Użytkownika Pobierz pdf (Strona 22)

Chapter 2 LSM Navigation

6 X Family LSM User’s Guide V 2.5.1

In addition, you can configure the LSM to communicate using either an HTTP or an HTTPS server. The

default configuration is to use an HTTPS server.Whenever the device is connected to your network,

you should run the HTTPS server, not the HTTP server. HTTP servers are not secure because your user

name and password travel over your network unencrypted. You should only use the HTTP server when

you are sure that communications between the device and the workstation from which you access the

LSM cannot be intercepted.

Logging In

When you log in to the LSM, you are prompted for your username and your password. This login gives

you access to the areas of the LSM permitted by your user role. For information on user roles and

accesses, see Chapter 9‚ “

Authentication”.

You will be presented with the login screen under the following situations:

• When you first log in to the LSM

• After the LSM web session times out

STEP 1

Enter the IP address or hostname of your IPS device in your browser Address bar. For

example:

https://123.45.67.89

The LSM displays a login page. The page provides the name and model of your device.

Note You can modify the server configuration using the conf t server command.

For details, see the Command Line Interface Reference Guide.

TIP

Most Web browsers will not treat addresses beginning with HTTP and

HTTPS interchangeably. If your browser cannot find your LSM, make sure that you

are using

http://

https://

depending on which Web server you are

running.

Note The device supports up to 10 Web client connections, 10 telnet/SSH (for

CLI) connections, and 1 console connection at once.

Depending on your security settings, warnings may display when accessing the

client. To access the device without warnings, refer to Appendix A‚ “

Browser

Certificates”.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 332 333

Brak uwag

HP X Unified Security Platform Series Instrukcja Użytkownika Strona 22