HP X Unified Security Platform Series Instrukcja Użytkownika Pobierz pdf (Strona 231)

PPTP Configuration

X Family LSM User’s Guide V 2.5.1 215

Enable PPTP Server and Configure PPTP Client and Addresses

STEP 1

If you are not using RADIUS to assign IP addresses, create an IP address group (Network >

Configuration > IP Address Groups) containing the pool of IP addresses that the X family

device will use to allocate IP addresses to L2TP VPN clients.

STEP 2

Select VPN > PPTP Status. Then click the PPTP Server Configuration tab.

STEP 3

On the PPTP Server Configuration page, check Enable PPTP Server.

This allows VPN clients to use the device as a VPN terminator for PPTP.

STEP 4

Select the remote security zone on which to terminate the VPN from the PPTP security zone

drop-down lists.

STEP 5

If you want to use Microsoft Point-to-Point Encryption, check Require encryption.

This provides additional security, and is supported by Windows VPN clients.

STEP 6

If you are using Microsoft Networking, enter the IP addresses of your primary and secondary

WINS servers in the WINS Server 1 and WINS Server 2 fields respectively.

STEP 7

To configure your DNS Servers, either:

•Select Device Acts as DNS Relay if you want the device to act as a proxy-DNS server (DNS

relay), passing DNS queries to its configured DNS servers

•Select Specify DNS Server and enter up to two local DNS server IP addresses, in the order

in which they are to be accessed, in the DNS Server fields

STEP 8

To assign PPTP IP Addresses, either:

•Select IP Address Assigned by RADIUS, if you want the device to use the RADIUS server

to assign the PPTP client IP address.

•Select IP Address Group and select an existing group from the drop-down list, if you want

the device to use an IP address group for the client.

STEP 9

Click Apply to save the changes.

PPTP

Addresses

Determines how IP addresses are allocated to clients connected through the

PPTP server:

• Select IP address assigned by RADIUS to enable the device to use the

RADIUS server to assign the PPTP client IP address. The RADIUS server must

be enabled on the RADIUS page (Authentication > RADIUS).

• Specify IP Address Group and select an existing address group to enable the

device to assign the PPTP client an IP address from the addresses included in

the IP Address group. Use the IP Addresses page (Network > Configuration >

IP Address Groups) to create IP Address Groups.

Note If PPTP Server is disabled, the table is not displayed and the message PPTP

Server is currently disabled is displayed.

Table 7–9: VPN: PPTP Server Configuration Parameters (Continued)

Parameter Description

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 332 333

Komentarze do niniejszej Instrukcji

Brak uwag

HP X Unified Security Platform Series Instrukcja Użytkownika Strona 231

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking HP X Unified Security Platform Series