HP Server rp7400 Instrukcja Użytkownika Pobierz pdf (Strona 19)

NOTE It is recommended that you pull the SPU from the back of

the cabinet. This allows you to monitor the cable

movement to avoid snags and tangles with other SPUs or

cables.

The SPU should now be fully extended out the back of the

cabinet.

WARNING Only extend one SPU at a time. Never attempt to

extend more that one SPU for any reason.

Step 4. Remove the Back Top Cover

CAUTION Operating the system without the back top cover in place

can make the SPU susceptible to EMI problems. Replace

the back top cover before operating the system.

To remove a back top cover from the SPU:

a. Loosen the two captive screws along the back edge of the

top cover.

b. Lift the back edge of the top cover up and away from the

SPU

Step 5. Remove the Back Air Baffle

CAUTION Operating the system without the back air baffle will

create air flow problems and possibly shorten the life of

the internal components. Hewlett-Packard does not

recommend the system be powered on with the air baffles

removed. Also, operation of the system without the top

cover and air baffle in place can make the system

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Brak uwag

HP Server rp7400 Instrukcja Użytkownika Strona 19