HP ProDesk 600 G4 Base Model Small Form Factor PC Instrukcja Użytkownika Pobierz pdf (Strona 88)

Network controller stops working without apparent cause.

Cause Solution

The les containing the network drivers are corrupted. Reinstall the network drivers using the Windows recovery tools.

If necessary, download the softpaq from the web (from a dierent

computer).

The cable is not securely connected. Ensure that the cable is securely attached to the network connector

and that the other end of the cable is securely attached to

the correct device.

The network controller is defective. Contact an authorized service provider.

New network card will not boot.

Cause Solution

New network card may be defective or may not meet industry-

standard specications.

Install a working, industry-standard NIC, or change the boot

sequence to boot from another source.

Cannot connect to network server when attempting Remote System Installation.

Cause Solution

The network controller is not congured properly. Verify Network Connectivity, that a DHCP Server is present, and that

the Remote System Installation Server contains the NIC drivers for

your NIC.

System setup utility reports unprogrammed EEPROM.

Cause Solution

Unprogrammed EEPROM. Contact an authorized service provider.

80 Chapter 6 Troubleshooting without diagnostics

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 123 124

Brak uwag

HP ProDesk 600 G4 Base Model Small Form Factor PC Instrukcja Użytkownika Strona 88