Hp Integrity NonStop J-Series Instrukcja Użytkownika Pobierz pdf (Strona 167)

Physical Location

The values displayed by these attributes are assigned through the Set Physical Location action.

A user-defined name assigned to identify the rack in which the IOAM

enclosure is located. You can enter up to 15 alphanumeric characters.

Rack Name

A number (from 1 to 42) assigned to describe the location of the IOAM

enclosure within the rack.

Rack Offset

An optional text string assigned to further identify the physical location of

the IOAM enclosure.

This attribute is displayed only if a value is specified using the Set Physical

Location action.

Locator

For DC-powered Telco systems only.

Displays the system alarm panel (SAP) identifier for this hardware resource,

as specified through the Alarm Panel Identifier option within the Set Physical

Location action. This attribute is displayed only if a value is specied through

the action.

Alarm Panel Identifier

Actions

Replace IOAM Enclosure or ServerNet Switch Board

Launches a guided procedure, which provides step-by-step instructions for replacing the entire

IOAM enclosure or an individual ServerNet switch board within the enclosure.

NOTE: For an HP Integrity NonStop NS14000 or NS1000 system, there is only one IOAM

enclosure, requiring an IOAM enclosure replacement to be done offline. Instead of a guided

procedure, the replacement procedure for this type of system is documented in the Service Procedures

section of the NTL Support and Service library, under NonStop NS-Series Hardware Servicing.

Set Physical Location

Allows you to assign these Physical Location attributes for the IOAM enclosure:

• Rack Name is a user-defined name for the rack containing the IOAM enclosure. You can enter

up to 15 alphanumeric characters.

• Rack Offset is a numerical value representing the location of the IOAM enclosure within the

rack. A valid integer (from 1 to 42) must be specified when performing the Set Physical Location

action, or the action will fail.

• Locator is an optional text string to help identify the physical location of the IOAM enclosure.

It must contain alphanumeric characters only.

• This parameter, used for DC-powered Telco systems only, allows you to specify a system alarm

panel (SAP) identifier, which is then displayed in OSM by the Alarm Panel Identifier attribute

for this hardware resource. An system alarm panel (SAP) provides visual alarm indicators and

relays for generating three levels of alarms to alert the customer to the severity of a hardware

error in the system. By default, systems are configured with one SAP located in the CIA for

the group 11 I/O enclosure. You might need to set the Alarm Panel Identifier if the system

has multiple SAPs, you add equipment to a system, or you move equipment from one system

to another.

With T0682 H02 AAN and later, you can also use the Physical Configuration Tool to set the Rack

Name and Rack Offset values in a consistent manner throughout the system while you create a

physical view of your modular racks.

IOAM Enclosure 167

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 327 328

Komentarze do niniejszej Instrukcji

Brak uwag

Hp Integrity NonStop J-Series Instrukcja Użytkownika Strona 167

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Hp Integrity NonStop J-Series