14. When a Windows cannot verify the digital signature for this file message
appears on the Windows Boot Manager screen, press Enter, followed by F8. Choose Disable
Driver Signature Enforcement. (To prevent repeating these actions, you can run following command
from a command prompt: Bcdedit.exe -set TESTSIGNING ON).
15. Verify that the host appears in the GUI host list.
16. Add the second host HBA to the original zone from step 5. The host should now see all required
front-end ports of both DPMs.
17. Log in to the DPM using the admin username and issue the command show debug wwpn. The
DPM included in the zone should see the second port HBA.
18. Go to the HP Command View SVSP GUI and add the second HBA to the host. Both must be in
present state.
19. Restart the host, go to the HBA BIOS, and set the boot device to use the other DPM's front-end
port.
Boot from SVSP devices96
Komentarze do niniejszej Instrukcji